HD76260: UNABLE TO OPEN V4 MODEL FROM VPM 1 6

APAR status

• Closed as program error.

Error description

• APAR TEXT :-
  ------------------------------------------------------------
  ---------------
  ABSTRACT: Interop VPM / CATIA V4: unable to
  open V4 model from VPM 1.6
  .
  SCENARIO:
  1) Login into VPM 1.6 and launch CV4
  2) Select the "VPMENV" Environment
  3) Query for "xyzModel_A"
  4) Open the "xyzModel_A" assembly by double
  clicking it with the left mouse button.
  5) Expand the tree by selecting " >>>" with the left
  mouse button.
  (Note: "Depth expand limit" is set to "Any")
  6) Multi select "3D" models by holding down the
  CTL button,
  7) Rgt mouse button, and then select "Open".
  8) Select "Open in a new Catia V4 session", and
  then select OK
  9) The assembly appears in Catia V4.25 SP7:
  .
  Steps to ADD a second Assembly:
  10) Query for "xyzModel_B"
  11) Open the "xyzModel_B" assembly by double
  clicking it with the left mouse button.
  12) Expand the tree by selecting " >>>" with the
  left mouse button.
  ( Note "Depth expand limit" is set to "Any" )
  13) Multi select "3D" models by holding down the
  CTL button,
  14) Rgt mouse button, and then select open.
  15) Select " Add in an existing Catia V4 session"
  and then select "OK"
  16) Select "OK"
  .
  RESULT:-  "110 error "
  .
  .
  

Local fix

Problem summary

• unable to open V4 model from VPM 1 6
  APAR TEXT :-
  ------------------------------------------------------------
  ---------------
  ABSTRACT: Interop VPM / CATIA V4: unable to
  open V4 model from VPM 1.6
  .
  SCENARIO:
  1) Login into VPM 1.6 and launch CV4
  2) Select the "VPMENV" Environment
  3) Query for "xyzModel_A"
  4) Open the "xyzModel_A" assembly by double
  clicking it with the left mouse button.
  5) Expand the tree by selecting " >>>" with the left
  mouse button.
  (Note: "Depth expand limit" is set to "Any")
  6) Multi select "3D" models by holding down the
  CTL button,
  7) Rgt mouse button, and then select "Open".
  8) Select "Open in a new Catia V4 session", and
  then select OK
  9) The assembly appears in Catia V4.25 SP7:
  .
  Steps to ADD a second Assembly:
  10) Query for "xyzModel_B"
  11) Open the "xyzModel_B" assembly by double
  clicking it with the left mouse button.
  12) Expand the tree by selecting " >>>" with the
  left mouse button.
  ( Note "Depth expand limit" is set to "Any" )
  13) Multi select "3D" models by holding down the
  CTL button,
  14) Rgt mouse button, and then select open.
  15) Select " Add in an existing Catia V4 session"
  and then select "OK"
  16) Select "OK"
  .
  RESULT:-  "110 error "
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  4 RELEASE 2.5 SP12 LEVEL.
  Incident Diagnosis:
  .
  unable to open V4 model from VPM 1 6
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V4 AIX

• Fixed component ID

  562610000

Applicable component levels

• R425 PSN UH95312

     UP08/10/01 I 1000