HD76066: PRESSURE UNITS EXPRESSED IN BAR ARE SHOWN AS BARA.

APAR status

• Closed as program error.

Error description

• Pressure units expressed in Bar are shown as bara.
  .
  Scenario:
  1. Start CV5.
  2. Go to Tools / Options / General / Parameters
  and Measure and then in
  the Units Tab.
  Result A: See available units for pressure: Millibar
  (mbara) is not correct.
  Expected Result A:
  It should either be Millibar (mbar) or Millibara
  (mbara) according to your notation for Hectobara.
  Result B: Bar Absolute is written as "bara" and
  gauge pressure is denoted by barg,
  Expected Result:
  Unit of pressure- bar is not part of the SI standard.
  Thus, neither bara or barg are part of SI standards
  hence they are strongly not recommended for use.
  (see bipm recommendations).
  .
  

Local fix

Problem summary

• Pressure units expressed in Bar are shown as bara.
  Pressure units expressed in Bar are shown as bara.
  .
  Scenario:
  1. Start CV5.
  2. Go to Tools / Options / General / Parameters
  and Measure and then in
  the Units Tab.
  Result A: See available units for pressure: Millibar
  (mbara) is not correct.
  Expected Result A:
  It should either be Millibar (mbar) or Millibara
  (mbara) according to your notation for Hectobara.
  Result B: Bar Absolute is written as "bara" and
  gauge pressure is denoted by barg,
  Expected Result:
  Unit of pressure- bar is not part of the SI standard.
  Thus, neither bara or barg are part of SI standards
  hence they are strongly not recommended for use.
  (see bipm recommendations).
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  THIS PROBLEM WILL ALSO BE FIXED ON
  V5R19SP02
  .
  Incident Diagnosis
  Pressure units expressed in Bar are shown as bara.
  .
  Correction Explanation:
  Pressure units milibar has been updated as
  milibara (mbara).
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP