HD75121: VOLUME DENSITY DOES NOT TAKE THE MATERIAL INTO CONSIDERATION

APAR status

• Closed as user error.

Error description

• ABSTRACT: VOLUME DENSITY DOES NOT TAKE
  THE MATERIAL INTO CONSIDERATION
  SCENARIO
  0) Start CATIA V5R18SP4.
  1) Open the file : "I01002.CATPart".
  Workbench : "Generative Shape Design".
  (Please confirm that the aluminum is applied
  to "Volume Extrude.1".)
  2) Click "Measure Inertia" icon. "Measure Inertia"
  dialog box is displayed.
  3) Select "Volume Extrude.1" on the tree. This is
  key point.
  "Measure Inertia" dialog box is expanded.
  Density is "1000kg_m3". This is problem.
  RESULT :The volume density does not take the
  material density into consideration when the
  volume was measured.
  EXPECTED RESULT:  The volume density should
  take the material density into consideration when
  the volume was measured.
  (In this scenario, it is "2710kg_m3".)
  .
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

• Incident Diagnosis
  Volume density does not take the material into
  consideration
  Correct Application
  The density is that of the material, if any, applied
  to a product, part or part body
  Hence as defined above, inertia calculation will take
  material applied into account applied to a product,
  part or part body and not to Geometrical Set.
  So inertia measured in case of Geometrical Sets
  will not have any effect of material applied to it,if
  any.
  Documentation Reference
  http://v5doc/doc17/online/DMUfr_E2/spaugDMUfrs.
  htm
  Measuring Inertia
  Measuring 3D Inertia
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels