HD74547: PART DESIGN / FEATURES NOT VISIBLE IN THE BODY AFTER CREATING U SER PATTERN

APAR status

• Closed as Permanent restriction.

Error description

• PART DESIGN / FEATURES NOT VISIBLE IN THE
  BODY AFTER CREATING USER PATTERN
  .
  Scenario
  .
  . FILE / OPEN the "CATPart".
  => The structure of this Part is segmented with
  some bodies. The
  basic body is created with an isolated Volume. Each
  of the
  following bodies are used for a direction of
  machining. This
  picture shows the structure of this part.
  2. View the body "Bearbeitung_Oberseite".
  => Among others the contents of this body is a
  user defined
  pattern
  with the feature name "FEHLER!!!!!!!!!".
  3. View the other body "Bearbeitung_Frontseite".
  => Among others the contents of this body is a
  rectangular
  pattern
  also with the feature name "FEHLER !!!!!!!!".
  4. To better illustrate the problem, please activate
  the icon
  "Only
  Current Body" in toolbar "Tools".
  5. If the feature "M8_Winkel_Oelkﾁhler" (a hole)
  in
  the body
  "Bearbeitung_Oberseite" is active:
  => All before generated elements in this body are
  correct and
  visible
  6. Activate the user defined pattern with
  name "FEHLER
  !!!!!" (Define
  in work object). This pattern follows directly the
  previously
  mentioned hole "M8_Winkel_Oelkﾁhler" in the
  structure of the part.
  => All before generated features disappear. Only
  one of the
  positions of the current rectangular pattern are
  displayed.
  But it is not the original position of the hole.
  7. If the feature "M10_" (a hole) in the body
  "Bearbeitung_Frontseite" is active:
  => All before generated elements in this body are
  correct and
  visible
  8. Activate the rectangular pattern with the
  name "FEHLER
  !!!!!"
  (Define in work object). This pattern follows
  directly the
  previously mentioned hole ?M10_? in structure of
  the part.
  => All before generated features disappear. Only
  one of the
  positions of the current rectangular pattern are
  displayed.
  But it is not the original position of the hole.
  9. If the PartBody is active (#Fertigteil).
  => Only the elements in the body
  "Bearbeitung_Oberseite" become
  visible, which have been generated after the user
  defined pattern
  with the error. Also the elements in the body
  "Bearbeitung_Frontseite" become visible which
  have been
  generated
  after the rectangle pattern with the error. The
  elements in this
  bodies before the respective error-pattern are not
  displayed.
  (The elements in the other bodies were correctly
  shown).
  A lot of Holes are not displayed!
  For example, see the problem in the picture for
  body
  "Bearbeitung_Frontseite".
  This situation is a big problem for the measure of
  weight, machining
  simulation, and so on ? of this part.
  => The contents of part is wrong!
  .
  Problem :Features are not visible after creating the
  user pattern
  .
  Expected Result :Features should be visible after
  creating the user pattern
  .
  .
  

Local fix

Problem summary

• PART DESIGN / FEATURES NOT VISIBLE IN THE BODY AFTER CREATING U
  SER PATTERN
  PART DESIGN / FEATURES NOT VISIBLE IN THE
  BODY AFTER CREATING USER PATTERN
  .
  Scenario
  .
  . FILE / OPEN the "CATPart".
  => The structure of this Part is segmented with
  some bodies. The
  basic body is created with an isolated Volume. Each
  of the
  following bodies are used for a direction of
  machining. This
  picture shows the structure of this part.
  2. View the body "Bearbeitung_Oberseite".
  => Among others the contents of this body is a
  user defined
  pattern
  with the feature name "FEHLER!!!!!!!!!".
  3. View the other body "Bearbeitung_Frontseite".
  => Among others the contents of this body is a
  rectangular
  pattern
  also with the feature name "FEHLER !!!!!!!!".
  4. To better illustrate the problem, please activate
  the icon
  "Only
  Current Body" in toolbar "Tools".
  5. If the feature "M8_Winkel_Oelk hler" (a hole)
  in
  the body
  "Bearbeitung_Oberseite" is active:
  => All before generated elements in this body are
  correct and
  visible
  6. Activate the user defined pattern with
  name "FEHLER
  !!!!!" (Define
  in work object). This pattern follows directly the
  previously
  mentioned hole "M8_Winkel_Oelk hler" in the
  structure of the part.
  => All before generated features disappear. Only
  one of the
  positions of the current rectangular pattern are
  displayed.
  But it is not the original position of the hole.
  7. If the feature "M10_" (a hole) in the body
  "Bearbeitung_Frontseite" is active:
  => All before generated elements in this body are
  correct and
  visible
  8. Activate the rectangular pattern with the
  name "FEHLER
  !!!!!"
  (Define in work object). This pattern follows
  directly the
  previously mentioned hole ?M10_? in structure of
  the part.
  => All before generated features disappear. Only
  one of the
  positions of the current rectangular pattern are
  displayed.
  But it is not the original position of the hole.
  9. If the PartBody is active (#Fertigteil).
  => Only the elements in the body
  "Bearbeitung_Oberseite" become
  visible, which have been generated after the user
  defined pattern
  with the error. Also the elements in the body
  "Bearbeitung_Frontseite" become visible which
  have been
  generated
  after the rectangle pattern with the error. The
  elements in this
  bodies before the respective error-pattern are not
  displayed.
  (The elements in the other bodies were correctly
  shown).
  A lot of Holes are not displayed!
  For example, see the problem in the picture for
  body
  "Bearbeitung_Frontseite".
  This situation is a big problem for the measure of
  weight, machining
  simulation, and so on ? of this part.
  => The contents of part is wrong!
  .
  Problem :Features are not visible after creating the
  user pattern
  .
  Expected Result :Features should be visible after
  creating the user pattern
  .
  .
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN
  CATIA
  INCIDENT DIAGNOSIS
  Features not Visible in the body After creating User
  Pattern
  .
  RESRTRICTION EXPLANATION :
  .
  This problem is data-specific. The data provided
  is corrupt. Created Pattern feature has invalid
  geometry associated with it.
  The Pattern feature which is KO, if recreated with
  same inputs, gives correct result.
  .
  BY-PASS
  Re-create the KO pattern feature.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels