HD72594: SKETCHER: THE ERROR MESSAGE FOR UPDATE LOOP

APAR status

• Closed as program error.

Error description

• SKETCHER:  THE ERROR MESSAGE FOR UPDATE
  LOOP DISPLAYED IS NOT CLEAR.
  .
  SCENARIO.
  1. Start CATIA V5R18SP03.
  2. Open the provided CATPart.
  3. Edit Sketch.2.
  4. Project the green 3D line onto the sketch plane.
  5. An error message is displayed which is not clear.
  This is the problem.
  Error: The error message displayed is not clear.
  .
  .
  

Local fix

Problem summary

• SKETCHER:  THE ERROR MESSAGE FOR UPDATE LOOP
  DISPLAYED IS NOT CLEAR.
  SKETCHER:  THE ERROR MESSAGE FOR UPDATE
  LOOP DISPLAYED IS NOT CLEAR.
  .
  SCENARIO.
  1. Start CATIA V5R18SP03.
  2. Open the provided CATPart.
  3. Edit Sketch.2.
  4. Project the green 3D line onto the sketch plane.
  5. An error message is displayed which is not clear.
  This is the problem.
  Error: The error message displayed is not clear.
  .
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 20 GA LEVEL.
  .
  Correction is also available on V5 R19 SP01 level.
  .
  Incident Diagnosis:
  In sufficient warning message while projecting
  certain 3D geometry in sketch.
  .
  Correction Explanation:
  Warning messgae corrected. New warning message
  will be "Projection onto the sketch plane failed;it
  would create an update cycle."
  .
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP