HD70180: DRAFTING (INTDRAFT) / CORNER NOT CREATED CORRECTLY WHEN HIDE / SHOW PERFORMED

APAR status

• Closed as unreproducible in next release.

Error description

• DRAFTING (INTDRAFT) / CORNER NOT CREATED
  CORRECTLY WHEN HIDE / SHOW PERFORMED.
  .
  SCENARIO:
  1. launch CATIA
  2. open the CATDrawing.
  3. Select the Corner Ico.
  4. Select Line.40
  5. Select Spline.1
  6. Radius : 5 mm
  7. Select error.2 and Hide/Show
  .
  Result Obtained:
  The Spline.1 is moved. the Corner is not created
  correctly.
  .
  Expected Results:
  The corner should be created correctly ,even when
  the other elements are made into Show.
  .
  .
  

Local fix

Problem summary

• DRAFTING (INTDRAFT) / CORNER NOT CREATED CORRECTLY WHEN HIDE /
  SHOW PERFORMED
  DRAFTING (INTDRAFT) / CORNER NOT CREATED
  CORRECTLY WHEN HIDE / SHOW PERFORMED.
  .
  SCENARIO:
  1. launch CATIA
  2. open the CATDrawing.
  3. Select the Corner Ico.
  4. Select Line.40
  5. Select Spline.1
  6. Radius : 5 mm
  7. Select error.2 and Hide/Show
  .
  Result Obtained:
  The Spline.1 is moved. the Corner is not created
  correctly.
  .
  Expected Results:
  The corner should be created correctly ,even when
  the other elements are made into Show.
  .
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 17SP03
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 19 GA level.
  .
  INCIDENT DIAGNOSIS:
  DRAFTING (INTDRAFT) / CORNER NOT CREATED
  CORRECTLY WHEN HIDE / SHOW PERFORMED.
  .
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP