HD69551: GSD: EDGE FILLET: INTERSECTION EDGES ACTIVATION OPTION DOES NOT WORK

APAR status

• Closed as user error.

Error description

• GSD: EDGE FILLET: INTERSECTION EDGES
  ACTIVATION OPTION DOES NOT WORK
  .
  SCENARIO:
  1) Start CATIA.
  2) Open supplied CATPart
  3) Select Edge Fillet Icon.
  4) Select Intersection icon in the User Selection
  Filter toolbar.
  5) Select the edge of the Trim.1.
  .
  PROBLEM:
  The Intersection edge is not selected even though
  the option is activated in the User selection Filter.
  .
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

• Incident Diagnosis:
  In V5R17, by selecting the icon C0 intersection
  edge, the selection mode was switched
  automatically to the "Intersection"
  .
  Correct Application:
  The functionnality is enhanced in V5R18.
  We have now 2 modes C0 and C1 intersection
  edges.
  To prevent any confusion between new C1
  intersection mode and the Tangency mode, it was
  decided that first the user has to select the
  Intersection mode in the panel.
  .
  The Enhanced Functionalities in Documentation now
  states -
  Creating Edge Fillets - Allows you to vary the
  section of the fillet using the Conical parameter
  option. You can also create a tangency continuous
  intersection edge ensuring that the intersection
  edge remains tangency continuous even after
  update.
  Intersection: the fillet is propagated to all the
  edges that have been generated by intersecting the
  features.
  If propagation mode is switched to Intersection
  and if Intersection edges activation or C1
  Intersection edges activation icon is not selected in
  the User Selection Filter toolbar, a warning
  message is displayed, and a continuous in
  tangency Intersection Edge is created by default.
  For further information, refer to Selecting Using A
  Filter in the CATIA Infrastructure User's Guide.
  .
  Documentation Reference:
  Generative Shape Design / What's New? /
  Enhanced Functionalities / Creating Edge Fillets
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels