HD69243: PART : SHELL : CRASH OCCURS WHILE CREATING SHELL IN A SPECIFIC CATPART

APAR status

• Closed as program error.

Error description

• PART : SHELL : CRASH OCCURS WHILE CREATING
  SHELL IN A SPECIFIC CATPART
  .
  SCENARIO:
  1.Start CATIA
  2.Open the attached CATPart
  3.Change to the PartDesign workbench
  3.Select the Icon for Shell feature creation
  4.Select from PartBody the green face as Faces to
  remove
  5.Set the Default inside thickness to 5mm
  6.Select the OK button.
  ==== ERROR: The system crashes
  .
  

Local fix

Problem summary

• PART : SHELL : CRASH OCCURS WHILE CREATING SHELL IN A SPECIFIC
  CATPART
  PART : SHELL : CRASH OCCURS WHILE CREATING
  SHELL IN A SPECIFIC CATPART
  .
  SCENARIO:
  1.Start CATIA
  2.Open the attached CATPart
  3.Change to the PartDesign workbench
  3.Select the Icon for Shell feature creation
  4.Select from PartBody the green face as Faces to
  remove
  5.Set the Default inside thickness to 5mm
  6.Select the OK button.
  ==== ERROR: The system crashes
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 19 GA level
  .
  Diagnosis:
  PART : SHELL : CRASH OCCURS WHILE CREATING
  SHELL IN A SPECIFIC CATPART
  .
  Correction Explanation
  Problem is corrected. Now abend is corrected. A
  clear message is raised conveying that Shell can
  not be created
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 AIX

• Fixed component ID

  569101000

Applicable component levels

• R519 PSN

     UP