HD69037: SAVE OF AN ASSEMBLY DRAWING AFTER AN UPDATE NOT POSSIBLE

APAR status

• Closed as unreproducible in next release.

Error description

• ABSTRACT: VPM/CV5 : SAVE OF AN ASSEMBLY
  DRAWING AFTER AN UPDATE NOT POSSIBLE.
  SCENARIO:
  1. Start VPM
  2. Start CATIA V5 with TOOL / EXECUTE / CATIA V5 .
  3. Create an assembly with empty documents in VPM
  4. Open the assembly in CATIA V5 with the option
     OPEN IN A NEW CATIA V5 PRODUCT .
  5. Create a pad in part design in Part
  6. Open the assembly drawing in CATIA V5 with the option
     OPEN AS REFERENCE (model/document)
  7. Create a front view of the assembly
  8. Select 'Save all' to save the documents
  9. Close the drawing
  10. Add a hole to the pad of part .
      Save the assembly and close it in V5
  11. Open the assembly drawing in CATIA V5 with
      the option 'Open as reference (model/document)
  12. Open the empty assembly with
      'Edit / Links / Pointed documents'
  13. Add the single part with the option
      'Add in existing Product'
  14. Switch to the drawing and update the drawing
  RESULT: Drawing is up to date, save is not possible
  .
  

Local fix

Problem summary

• Save of an assembly drawing after an update not possible
  ABSTRACT: VPM/CV5 : SAVE OF AN ASSEMBLY
  DRAWINF AFTER AN UPDATE NOT POSSIBLE . .
  SCENARIO:
  1. Start VPM
  2. Start CATIA V5 with TOOL / EXECUTE / CATIA
  V5 .
  3. Create an assembly with empty documents in
  VPM
  4. Open the assembly in CATIA V5 with the option
  OPEN IN A NEW CATIA V5 PRODUCT .
  5. Create a pad in part design in Part
  6. Open the assembly drawing in CATIA V5 with
  the option OPEN AS REFERENCE (model/document)
  7. Create a front view of the assembly
  8. Select 'Save all' to save the documents
  9. Close the drawing
  10. Add a hole to the pad of part . Save the
  assembly
  11. Open the assembly drawing in CATIA V5 with
  the option 'Open as reference (model/document)
  12. Open the empty assembly with 'Edit / Links /
  Pointed documents'
  13. Add the single part with the option 'Add in
  existing Product'
  14. Switch to the drawing and update the drawing
  RESULT:
  Drawing is up to date, save is not possible
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 18.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 19 GA level AND
  ON  V5R18SP03 , ALSO FIXED ON
  V5R18SP02.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 AIX 64

• Fixed component ID

  569161000

Applicable component levels

• R518 PSN SP51803

     UP08/01/25 I 1000