HD68378: LINK BETWEEN PVR CATPRODUCT AND ASSEMBLY DRAWING DOES

APAR status

• Closed as duplicate of another APAR.

Error description

• Link between PVR CATProduct and Assembly
  Drawing does not show that an update is required
  .
  Preparation:
  -From Scratch build a simple assembly with 2 Part
  detail.
  No need to use a specific geometry in order to play
  the scenario
  -On the first assembly level underneath the PRC
  create a PVR.
  -Based on the PVR create an assembly drawing.
  .
  Modify one of the detailed parts
  -Close all open windows except the VPM-Navigator
  window
  -In the VPM-Navigator window select the CATPart
  document of one of
  the two detailed parts and load it into CATIA 'out-of-
  context' into
  a single document window
  -In CATIA modify the part (here: add a hole)
  -Save back the Part to ENOVIA (without creating
  new part version or
  document revision)
  Close the CATIA window
  .
  Synchronize the PVR
  -In VPMNav Open the 'impacts-on' Graph for the
  modified CATPart
  => the PVR requires an update
  -Open the PVR into CATIA
  -Synchronize the PVR to exploded structure of the
  PRC
  -Save the PVR back to ENOVIA even if it tells, that
  it is up to date
  Check the assembly drawing
  refresh the impact graph from the previous step
  .
  Result : the impact graph shows, that the link
  between the PVR and the
  assembly drawing is up-to-date whereas Drawing
  needs to be updated.
  .
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

•  THE PROBLEM HAS BEEN FOUND TO BE
  ANOTHER SYMPTOM OF THE PROBLEM
  REPORTED IN HD68797
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels