HD68067: IN R18 GA QUERY TOLERANCE ZONE FORM ON PARTICULAR CASE DOES NOT WORK

APAR status

• Closed as unreproducible in next release.

Error description

• Scenario:
  1. Build the sample workspace.
  2. Run the XXXTPSScan.sh batch file.
  -> The goal of the batch is to demonstrate an issue
  with the method GetForm() of the
  CATITPSToleranceZone CAA Interface.
  3. Check the output.
  -> In the result of the TPS Dump in the batch
  sample this zone was:
  .
  a) Output on R17SP5:
  ----------------------------------------------------
  | Tolerance 5                                      |
  ----------------------------------------------------
  ...
  Tolerance zone data:
  Tolerance zone value:       0.150 mm
  Tolerance zone form:        Volume generated by
  plane shift
  Associative group of TPS:    1 associated TPS
  5E
  ...
  .
  b) Output on R18SP1HF2 level:
  ----------------------------------------------------
  | Tolerance 5                                      |
  ----------------------------------------------------
  ...
  Tolerance zone data:
  Tolerance zone value:       0.150 mm
  Tolerance zone form:        Not defined
  Associative group of TPS:    1 associated TPS
  5E
  ...
  .
  Problem:
  The result has changed between R17SP5 and
  R18SP1HF2 level. FTA modeler needs to give a
  tolerance zone form on this case.
  .
  

Local fix

Problem summary

• In R18 GA Query tolerance zone form on particular case does not
  work
  Scenario:
  1. Build the sample workspace.
  2. Run the XXXTPSScan.sh batch file.
  -> The goal of the batch is to demonstrate an issue
  with the method GetForm() of the
  CATITPSToleranceZone CAA Interface.
  3. Check the output.
  -> In the result of the TPS Dump in the batch
  sample this zone was:
  .
  a) Output on R17SP5:
  ----------------------------------------------------
  | Tolerance 5                                      |
  ----------------------------------------------------
  ...
  Tolerance zone data:
  Tolerance zone value:       0.150 mm
  Tolerance zone form:        Volume generated by
  plane shift
  Associative group of TPS:    1 associated TPS
  5E
  ...
  .
  b) Output on R18SP1HF2 level:
  ----------------------------------------------------
  | Tolerance 5                                      |
  ----------------------------------------------------
  ...
  Tolerance zone data:
  Tolerance zone value:       0.150 mm
  Tolerance zone form:        Not defined
  Associative group of TPS:    1 associated TPS
  5E
  ...
  .
  Problem:
  The result has changed between R17SP5 and
  R18SP1HF2 level. FTA modeler needs to give a
  tolerance zone form on this case.
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 18.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 19 GA level AND ON
  V5R18SP02.
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN SP51802

     UP07/11/13 I 1000