HD65634: LINK TO ASSEMBLY IS LOST AS SAVE IN SMARTEAM SOLIDWORKS INTE

APAR status

• Closed as program error.

Error description

• Link of SolidWorks drawing to assembly is lost after
  save in SMARTEAM when operating in lightweight
  mode.
  Scenario:
  1) Launch SolidWorks and connect SmarTeam.
  2) Select Tool/Options.
  3) Click System Option tab.
  4) Click Performance.
  5) Enable automatically load components
  lightweight.
  6) Click Assemblies in system option.
  7) Enable Use Large Assembly Mode to improve
  performance
  whenever working with an assembly containing
  more than this number
  of components 1
  Automatically load components lightweight
  Do not save auto recover info
  Hide all planes, axes, sketches, curves,
  annotations, etc..
  Do not display edges in shaded mode
  8) Click Ok button.
  9) Restart SolidWorks and connect SmarTeam.
  10) Create an Assembly in SolidWorks containing
  at least 1 part.
  11) Select Save as in SolidWorks and save the
  assembly.
  12) Close the assembly and reopen it (it will open
  in lightweight mode).
  10) Select File/Make Drawing from Assembly.
  11) Create a Drawing, and save it to SmarTeam.
  12) Select SmarTeam/locate Active Document.
  17) Click Link tab.
  18) Click SolidWorks links tab.
  19) (KO!)=> There are no links!
  Best regards,
  Ofer Rahamim
  .
  

Local fix

Problem summary

• Link to assembly is lost as save in SMARTEAM SolidWorks inte
  Link of SolidWorks drawing to assembly is lost after
  save in SMARTEAM when operating in lightweight
  mode.
  Scenario:
  1) Launch SolidWorks and connect SmarTeam.
  2) Select Tool/Options.
  3) Click System Option tab.
  4) Click Performance.
  5) Enable automatically load components
  lightweight.
  6) Click Assemblies in system option.
  7) Enable Use Large Assembly Mode to improve
  performance
  whenever working with an assembly containing
  more than this number
  of components 1
  Automatically load components lightweight
  Do not save auto recover info
  Hide all planes, axes, sketches, curves,
  annotations, etc..
  Do not display edges in shaded mode
  8) Click Ok button.
  9) Restart SolidWorks and connect SmarTeam.
  10) Create an Assembly in SolidWorks containing
  at least 1 part.
  11) Select Save as in SolidWorks and save the
  assembly.
  12) Close the assembly and reopen it (it will open
  in lightweight mode).
  10) Select File/Make Drawing from Assembly.
  11) Create a Drawing, and save it to SmarTeam.
  12) Select SmarTeam/locate Active Document.
  17) Click Link tab.
  18) Click SolidWorks links tab.
  19) (KO!)=> There are no links!
  Best regards,
  Ofer Rahamim
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON SMARTEAM
  VERSION 5 RELEASE 18 SP3.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  SMARTEAM NT>XP

• Fixed component ID

  569199970

Applicable component levels

• R518 PSN

     UP