HD64895: GSD : BAD PLANE REPRESENTATION POSITION AFTER INSERTION OF A PO WER COPY

APAR status

• Closed as Permanent restriction.

Error description

• GSD : BAD PLANE REPRESENTATION POSITION
  AFTER INSERTION OF A POWER COPY
  .
  Scenario:
  1.Open TRY.CATPart
  2.Select Insert/Instantiate From Document, then
  select POWER_COPY.CATPart.
  3.Select Circle, Point, DRAFT and Surface in the
  tree in this order then click OK.
  >>> A plane is correctly offseted but its
  representation is moved incorrectly. This is the
  problem.
  .
  

Local fix

Problem summary

• GSD : BAD PLANE REPRESENTATION POSITION AFTER INSERTION OF A PO
  WER COPY
  GSD : BAD PLANE REPRESENTATION POSITION
  AFTER INSERTION OF A POWER COPY
  .
  Scenario:
  1.Open TRY.CATPart
  2.Select Insert/Instantiate From Document, then
  select POWER_COPY.CATPart.
  3.Select Circle, Point, DRAFT and Surface in the
  tree in this order then click OK.
  >>> A plane is correctly offseted but its
  representation is moved incorrectly. This is the
  problem.
  .
  

Problem conclusion

• null
  ==========*===========*==========
  THIS PROBLEM IS PERMANENT RESTRICTION IN
  CATIA
  .
  Incident Diagnosis
  During a power-copy instantiation, a plane
  representation is moved incorrectly. Let's say that
  the representation of plane B (which is the
  instantiation of a reference plane A) does not seem
  to have a good position.
  .
  Restriction Explanation
  By analyzing the data, it has been found that the
  reference plane A had been moved using "Move"
  manipulator when the feature was edited. The
  position (thus defined) is stored inside the feature
  (or to be more precise : the coordinates of central
  point of the plane square-representation are store
  inside the feature)
  During the Powercopy, those coordinates are used
  to position the representation of instantiated plane.
  Here in this scenario plane B representation is
  created using the same coordinates as the original
  part. Result is that it is shown at different position
  because the power-copy input features have also
  different position.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels