HD64519: GSD: BOUNDARY: GAP IS CREATED FOR A BOUNDARY OF A GOOD SURFACE

APAR status

• Closed as user error.

Error description

• GSD: BOUNDARY: GAP IS CREATED FOR A
  BOUNDARY OF A GOOD SURFACE
  .
  SCENARIO:
  0) Start CATIA V5R17SP3Hotfix17.
  1) Open the file: "T9541.CATPart".
  Workbench: "GSD".
  2) Click "WYSIWYG mode" icon.
  (Please confirm that distance does not exist in the
  internal element.)
  3) Click "Boundary" icon.
  = "Boundary Definition" dialog box is displayed.
  4) Select 1 edge in the surface on the geometry
  area.
  5) Click "OK".
  = "Boundary.7" is created.
  6) Click "Curve Connect Checker" icon.
  7) Select "Boundary.7" on the geometry area.
  .
  OBSERVATION:
  0.004mm distance exists in a boundary.
  A gap exists in the boundary although distance
  does not exist in the internal element.
  .
  

Local fix

Problem summary

Problem conclusion

Temporary fix

Comments

• null
  ==========*===========*==========
  Incident Diagnosis:
  The gap is created in the boundary because it is on
  the external boundary. There is no gap in the
  internal boundary. There is no hole between the
  Left side Face and the Right one.
  The hole is situated on the external border on the
  Junction Vertex.
  .
  Correct Application:
  There is a gap between both Vertices.
  Its distance is 0.004. In WYSIWYG mode, no edge
  represents this hole between both Edge extremities
  .
  Documentation Reference:
  GSD / Basic Tasks / Using Tools / Working With the
  WYSIWYG Mode
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels