HD63488: MACHINING (3ASMG) / "REWORK" COMPUTATION IS DIFFERENT FOR TWO S AME GEOMERTIES.

APAR status

• Closed as program error.

Error description

• Machining (3ASMG) / "Rework" computation is
  different for two same geomerties.
  .
  SCENARIO:
  1. Start CATIA V5R17SP4
  2. Open "start_rework_error.CATProcess"
  3. Switch to "Surface Machining" workbench
  4. Click "Rework Area" icon in "Machining Features"
  toolbar.
  5. Click "Part" and select Body.5 by double-click.
  6. In "Tool" TAB, select "T1 Endmill D10"
  7. In "Other" TAB, input as follows:
  Tolerance: 0.01mm
  Offset on part: -0.2mm
  8. Click "Compute" button to compute the area.
  9. "Rework Area" detects on a one of a pocket and
  NOT on the other pocket.
  KO: "Rework Area" can not detect all tough they
  are same geometry.
  .
  EXPECTED RESULT:
  "Rework Area" should detect correctly for same
  geometry, without depending
  on values of "tolerance" and "offset on part".
  .
  .
  

Local fix

Problem summary

• Machining (3ASMG) / "Rework" computation is different for two s
  ame geomerties.
  Machining (3ASMG) / "Rework" computation is
  different for two same geomerties.
  .
  SCENARIO:
  1. Start CATIA V5R17SP4
  2. Open "start_rework_error.CATProcess"
  3. Switch to "Surface Machining" workbench
  4. Click "Rework Area" icon in "Machining Features"
  toolbar.
  5. Click "Part" and select Body.5 by double-click.
  6. In "Tool" TAB, select "T1 Endmill D10"
  7. In "Other" TAB, input as follows:
  Tolerance: 0.01mm
  Offset on part: -0.2mm
  8. Click "Compute" button to compute the area.
  9. "Rework Area" detects on a one of a pocket and
  NOT on the other pocket.
  KO: "Rework Area" can not detect all tough they
  are same geometry.
  .
  EXPECTED RESULT:
  "Rework Area" should detect correctly for same
  geometry, without depending
  on values of "tolerance" and "offset on part".
  .
  .
  

Problem conclusion

• null
  ==========*===========*==========
  THIS PROBLEM WILL BE FIXED ON CATIA VERSION
  5 RELEASE 18 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED
  ON V5R17SP06.
  .
  Incident Diagnosis
  Machining (3ASMG) / "Rework" computation is
  different for two same geomerties.
  Correction Explanation
  Now the computation is corrected.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R517 PSN SP51706

     UP07/06/28 I 1000