HD62850: GSD: WYSIWYG MODE - THE MODE SHOWS AN INCORRECT SURFACE PROTRUD ING OUT.

APAR status

• Closed as unreproducible in next release.

Error description

• GSD: WYSIWYG MODE - THE MODE SHOWS AN
  INCORRECT SURFACE PROTRUDING OUT.
  .
  SCENARIO:
  1) Start CATIA.
  2) Open a sent
  file "WYSI070321.CATPart". "Surface.1" appears.
  3) Click "WYSIWYG mode" the icon.
  4) Zoom-in on the internal edge. See the sticking
  surface out of the prime one. This is the
  problem.
  .
  .
  

Local fix

Problem summary

• GSD: WYSIWYG MODE - THE MODE SHOWS AN INCORRECT SURFACE PROTRUD
  ING OUT.
  GSD: WYSIWYG MODE - THE MODE SHOWS AN
  INCORRECT SURFACE PROTRUDING OUT.
  .
  SCENARIO:
  1) Start CATIA.
  2) Open a sent
  file "WYSI070321.CATPart". "Surface.1" appears.
  3) Click "WYSIWYG mode" the icon.
  4) Zoom-in on the internal edge. See the sticking
  surface out of the prime one. This is the
  problem.
  .
  .
  

Problem conclusion

Temporary fix

Comments

• null
  ==========*===========*==========
  THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 17.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 18 GA level AND ON
  V5R17SP06.
  .
  Incident Diagnosis:
  The part desinged by user has a Join operation on
  the surface, which has caused bad parametrisation.
  An extra surface bar is shown in WYSIWYG mode.
  .
  Additional Information:
  If Join Operation is re-performed, then the
  parametrization will become OK, and the WYSIWYG
  Visu wil become OK as well.  WYSIWYG allows the
  user, on this case, to detect a problem on his Part.
  So the behavior of WYSIWYG mode is correct one.
  .
  Bypass:
  Disassemble the faces and Join them again. Both
  problems (Visu and parametrization) will then
  disappear.
  .
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R517 PSN

     UP