HD62459: INTEROP V4 V5 2D - CATIA V4 DATA PASTED IN CATIA V5 DRAWING DOE S NOT HAVE ALL ELEMENTS

APAR status

• Closed as Permanent restriction.

Error description

• INTEROP V4 V5 2D - CATIA V4 DATA PASTED IN
  CATIA V5 DRAWING DOES NOT HAVE ALL
  ELEMENTS
  Scenario :
  1. Start CATIA V5
  2. Copy the attached Project folder
  3. Tools/Options and set V4 Project file.
  4. Open the model.
  5. Open a new Drawing in JIS standard.
  6. Select DRAFT TAB in V4 file and copy DRAFT.
  7. Paste to the new Drawing.
  .
  OBSERVATION:
  Details are missing in the paste result
  .
  EXPECTED RESULT:
  All elements should be pasted correctly
  .
  

Local fix

Problem summary

• INTEROP V4 V5 2D - CATIA V4 DATA PASTED IN CATIA V5 DRAWING DOE
  S NOT HAVE ALL ELEMENTS
  INTEROP V4 V5 2D - CATIA V4 DATA PASTED IN
  CATIA V5 DRAWING DOES NOT HAVE ALL
  ELEMENTS
  Scenario :
  1. Start CATIA V5
  2. Copy the attached Project folder
  3. Tools/Options and set V4 Project file.
  4. Open the model.
  5. Open a new Drawing in JIS standard.
  6. Select DRAFT TAB in V4 file and copy DRAFT.
  7. Paste to the new Drawing.
  .
  OBSERVATION:
  Details are missing in the paste result
  .
  EXPECTED RESULT:
  All elements should be pasted correctly
  .
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN
  CATIA
  Incident Diagnosis :
  NTEROP V4 V5 2D - CATIA V4 DATA PASTED IN
  CATIA V5 DRAWING DOES NOT HAVE ALL
  ELEMENTS
  Restriction Explanation :
  Two problem here:
  1) Problem of letter (character) :
  Unreproductible on R18GA level.
  2) Problem of leader (missing line) :
  Not possible in V5. In V4, visualisation information
  from draw this kind of leader : information not
  stored for leader information.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels