HD62364: PART : MULTI SECTION SOLID CAN NOT BE CREATED WITH SPECIFIC SKE TCHES

APAR status

• Closed as unreproducible in next release.

Error description

• PART : MULTI SECTION SOLID CAN NOT BE
  CREATED WITH SPECIFIC SKETCHES
  .
  Scenario:
  1. Open NUL-250.CATPart.
  2. Double-click at parameter/error_2 and change
  value to 6mm and then click OK.
  3. During update, error occurs. <= KO (Fig.1)
  .
  Error message :
  Invalid empty or missing input element. One
  mandatory input element is invalid, empty or
  missing. There is no solution for this operation.
  .
  Additional information :
  A-1. After step.3, double-click at
  parameter/error_1 and change value to100mm and
  then click OK.
  A-2. Geometry is created without any problem. <=
  OK (Fig.2)
  .
  Expected Result :
  Multi-section solid should be created without any
  problem in this case.
  .
  .
  

Local fix

Problem summary

• PART : MULTI SECTION SOLID CAN NOT BE CREATED WITH SPECIFIC SKE
  TCHES
  PART : MULTI SECTION SOLID CAN NOT BE
  CREATED WITH SPECIFIC SKETCHES
  .
  Scenario:
  1. Open NUL-250.CATPart.
  2. Double-click at parameter/error_2 and change
  value to 6mm and then click OK.
  3. During update, error occurs. <= KO (Fig.1)
  .
  Error message :
  Invalid empty or missing input element. One
  mandatory input element is invalid, empty or
  missing. There is no solution for this operation.
  .
  Additional information :
  A-1. After step.3, double-click at
  parameter/error_1 and change value to100mm and
  then click OK.
  A-2. Geometry is created without any problem. <=
  OK (Fig.2)
  .
  Expected Result :
  Multi-section solid should be created without any
  problem in this case.
  .
  .
  

Problem conclusion

Temporary fix

Comments

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION 5 RELEASE 17.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION 5 RELEASE 18 GA level
  .
  Scenario reproduced on reported R17SP03 level.
  .
  .
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R518 PSN

     UP