HE09761: CURVE IS NOT CREATED CORRECTLY BY MESH INTERSECT COMMAND.

APAR status

• Closed as program error.

Error description

• Scenario:
  1. Open the given CATPart in CATIA Shape Sculptor workbench.
  2. Click on the mesh intersect icon.
  3. Select the create curve option.
  4. Select the two items to intersect from the tree and hit
  Apply.
  5. The preview is shown. Hide the two intersecting elements
  from the tree to view the curve.
  6. Hit OK and then view the curve.
  Problem:
  The preview shows the correct curve but this curve is not
  shown as the final result after clicking OK.
  Expected Result:
  The curve should be created correctly as it is shown in the
  preview.
  

Local fix

• empty
  

Problem summary

• Scenario:
  1. Open the given CATPart in CATIA Shape Sculptor workbench.
  2. Click on the mesh intersect icon.
  3. Select the create curve option.
  4. Select the two items to intersect from the tree and hit
  Apply.
  5. The preview is shown. Hide the two intersecting elements
  from the tree to view the curve.
  6. Hit OK and then view the curve.
  Problem:
  The preview shows the correct curve but this curve is not
  shown as the final result after clicking OK.
  Expected Result:
  The curve should be created correctly as it is shown in the
  preview.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON V5R22 GA LEVEL.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R21 SP2.
  Additional Closure Information:
  Incident Diagnosis:
  Curve is not created correctly by Mesh Intersect command.
  Technical explanation of the correction:
  The resulting curve intersection is a Nurbs contructed on the
  points of the polyline intersection. In the attached model
  some of theese polylines have more than 10 000 points
  (25000), it was too much to calculate the Nurbs. The
  capabilty has been improved to give better result.
  Possible by-pass and/or correction limitation:
  None.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R521 PSN

     UP