HE09348: SECTIONING IS NOT KEPT IN ASSEMBLY DESIGN

APAR status

• Closed as Permanent restriction.

Error description

• .Scenario:
  1. Open an Assembly in CATIA.
  2. Activate Sectionning Command.
  3. In the sectionning definition window, set the section
  correctly and then click on OK.
  4. Observe the spec tree.
  Problem:
  The sectionning vanishes and it does not appear in the
  specification tree either.
  Expected Result:
  The user should be able to view the sectionning from the
  specification tree. Section should appear on the spec tree.
  

Local fix

• empty
  

Problem summary

• .Scenario:
  1. Open an Assembly in CATIA.
  2. Activate Sectionning Command.
  3. In the sectionning definition window, set the section
  correctly and then click on OK.
  4. Observe the spec tree.
  Problem:
  The sectionning vanishes and it does not appear in the
  specification tree either.
  Expected Result:
  The user should be able to view the sectionning from the
  specification tree. Section should appear on the spec tree.
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN CATIA
  Additional Closure Information:
  Incident Diagnosis:
  Sectioning is not kept in Assembly Design
  Reason:
  The section features created without valid DMU Space Analysis
  license (e.g. SPA) will be non-persistent, i.e. on OK,
  neither section reps is retained in visualization nor the
  spec tree node for section created is retained.
  HD2 license does not authorize any DMU Space Analysis Product
  (e.g. SPA). So section created will not be persisted on OK.
  This is a packaging / licensing restriction existing in CATIA
  for section features.
  Also recently this restriction was documented in R21 level
  Sectioning Doc under BR10000102619.
  By-Pass:
  None
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels