HE09331: DIFFERENT CLASH RESULTS IN CATIA WITH AND WITHOUT CACHE

APAR status

• Closed as Permanent restriction.

Error description

• ABSTRACT:
  Different clash results in CATIA with and without cache.
  .
  SCENARIO
  1) Start CATIA V5 (Without Cache ON)
  2) Open "New.CATProduct"
  3) Insert Test1.CATPart and Test2.CATPart
  4) Open "New.CATProduct" In "DMU Space Analysis" workbench.
  5) Select "Clash" command.
  5) Select Type "Contact + Clash" Between all Components.
  7) check Result
  Now Repeat Same Scenario With "Cache Setting ON" in
  Tool\Option\Infrastructure.
  The Clash Result is Different
  .
  This is the problem.
  Result
  Different clash results in CATIA with and without cache
  setting.
  Expected Result
  Clash results should Be same with and without cache Setting.
  

Local fix

• empty
  

Problem summary

• ABSTRACT:
  Different clash results in CATIA with and without cache.
  .
  SCENARIO
  1) Start CATIA V5 (Without Cache ON)
  2) Open "New.CATProduct"
  3) Insert Test1.CATPart and Test2.CATPart
  4) Open "New.CATProduct" In "DMU Space Analysis" workbench.
  5) Select "Clash" command.
  5) Select Type "Contact + Clash" Between all Components.
  7) check Result
  Now Repeat Same Scenario With "Cache Setting ON" in
  Tool\Option\Infrastructure.
  The Clash Result is Different
  .
  This is the problem.
  Result
  Different clash results in CATIA with and without cache
  setting.
  Expected Result
  Clash results should Be same with and without cache Setting.
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN I-PLM Collaborative
  Innovation
  Additional Closure Information:
  Incident Diagnosis:
  The output of Clash command is incorrect when not working
  with cache.
  Reason:
  A point which is located far away from the car cause Clash
  wrong result.The algorithm does not expect so Because of this
  Point present reason, the algorithm does not behave properly
  By-Pass:
  Hide the point, and run the Clash command.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels