HE09166: SECTION VIEW CREATED BY AUXILIARY VIEW IS NOT POSITION ACCORDING OF REFERENCE VIEW.

APAR status

• Closed as program error.

Error description

• Scenario:
  1. Create a Part.
  2. Created a Solid (Pad for example)
  3. Transformation Axis to Axis.
  4. Set Tool / Options / Mechanical Design / General / View
  axis / Display in the current view OFF.
  5. Create a new Drawing.
  6. Create a Front View from Part1.
  7. From Front View, create Detail View.
  8. From Detail View, create Auxiliary View.
  9. From Auxiliary View, create Section View. The attached
  Drawing1.CATDrawing is created.
  Problem:
  Section View is created at another location than Preview, and
  is not Position According of Reference View.
  (does not have Position According of Reference View menu.)
  Expected Result:
  Section View created by Auxiliary View should be in Position
  According to Reference View.
  

Local fix

• empty
  

Problem summary

• Scenario:
  1. Create a Part.
  2. Created a Solid (Pad for example)
  3. Transformation Axis to Axis.
  4. Set Tool / Options / Mechanical Design / General / View
  axis / Display in the current view OFF.
  5. Create a new Drawing.
  6. Create a Front View from Part1.
  7. From Front View, create Detail View.
  8. From Detail View, create Auxiliary View.
  9. From Auxiliary View, create Section View. The attached
  Drawing1.CATDrawing is created.
  Problem:
  Section View is created at another location than Preview, and
  is not Position According of Reference View.
  (does not have Position According of Reference View menu.)
  Expected Result:
  Section View created by Auxiliary View should be in Position
  According to Reference View.
  

Problem conclusion

• NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R21 SP2.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R22 GA.
  Additional Closure Information:
  Technical explanation of the defect:
  Section View created by Auxiliary View is not Position
  According of Reference View.
  Technical explanation of the correction:
  The problem has been fixed.
  The section view is now correctly aligned with its reference
  view.
  Possible by-pass and/or correction limitation:
  No by-pass
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R521 PSN

     UP