HE08698: PART: POINTS: 3D POINT AND ITS PROJECTED POINTS IN SKETCHER GETS DISAPPEAR WHILE PERFORMING ZOOM, PAN AND ROTATE OPERATIONS.

APAR status

• Closed as unreproducible in next release.

Error description

• .
  SCENARIO:
  1.  Start CATIA V6.
  2.  Create New part.
  3.  Create Point with(X, Y and Z) coordinates as (50, 50, and
  50).
  4.  Perform Zoom in, Zoom out and pan rotate operations,
       Point gets disappeared while performing these operations
  ? This is problem.
  5.  Click on Sketcher and select XY plane,
       Workbench is changed into sketcher.
  6.  Click ?Project 3D Elements? icon and select the point
  created.
  7.  Perform Zoom in, Zoom out and pan rotate operations,
       Point gets disappeared in sketcher also while performing
  these operations ? This is problem.
  .
  PROBLEM:
  3D point and its projected points in sketcher gets disappear
  while performing Zoom, Pan and Rotate operations.
  .
  EXPECTED RESULT:
  3D point and its projected points in sketcher should not
  disappear while performing Zoom, Pan and Rotate operations.
  .
  

Local fix

• empty
  

Problem summary

• .
  SCENARIO:
  1.  Start CATIA V6.
  2.  Create New part.
  3.  Create Point with(X, Y and Z) coordinates as (50, 50, and
  50).
  4.  Perform Zoom in, Zoom out and pan rotate operations,
       Point gets disappeared while performing these operations
  ? This is problem.
  5.  Click on Sketcher and select XY plane,
       Workbench is changed into sketcher.
  6.  Click ?Project 3D Elements? icon and select the point
  created.
  7.  Perform Zoom in, Zoom out and pan rotate operations,
       Point gets disappeared in sketcher also while performing
  these operations ? This is problem.
  .
  PROBLEM:
  3D point and its projected points in sketcher gets disappear
  while performing Zoom, Pan and Rotate operations.
  .
  EXPECTED RESULT:
  3D point and its projected points in sketcher should not
  disappear while performing Zoom, Pan and Rotate operations.
  .
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION V5R20.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION V5R20 SP7.
  CATIA VERSION V5R21 SP1.
  Additional Closure Information:
  .
  INCIDENT DIAGNOSIS:
  3D point and its projected points in sketcher gets disappear
  while performing Zoom, Pan and Rotate operations.
  .
  ADDITIONAL INFORMATION:
  This problem is no more reproducible on above mentioned
  levels and 3D point and its projected points in sketcher are
  not disappear while performing Zoom, Pan and Rotate
  operations.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CAA V5 NT>XP

• Fixed component ID

  569151100

Applicable component levels