HE08159: SWI : SOLIDWORKS CRASHES AFTER CI FROM A SUB-ASM AND EXPANDING T HE DMT

APAR status

• Closed as program error.

Error description

• Customer Scenario:- (Please go through the Preparation Steps
  to reproduce this issue)
  1) Clear the Work directory
  2) Open the Assembly T158280 Rev E.00 (Checked In) as
  Read-Only via context menu / Open For... / Open as read-only,
  select the Configuration "Mal open" and OK
  3) In SolidWorks Fk "File / Make Assembly from Assembly" and
  place the Object
  4) In the new RootAssembly, select the 'ConfigurationManager'
  and select the 'Default' configuration with the context menu
  / Add Derived Configuration...
  . - Create a Derived configuration named "test"
  5) In SolidWorks Fk "Insert / Component / Existing
  Part/Assembly...
  . - Select Browse...
  . - Search for the Assembly T1200697 (T1200223) and select OK
  to place it in the RootAssembly
  6) Insert the same Assembly T1200697 (T1200223) again to the
  RootAssembly
  7) Select the DMT
  8) Perform a SmarTeam / Save Operation
  -> During the save operation, SmarTeam tries to save the
  ReadOnly Asm T158280. Select Cancel to not save the assembly.
  9) Close the SmarTeam ProfileCard
  10) In the DMT, select the SubAssembly T158280 with the
  context menu / Open T158280.sldasm
  11) In this SubAssembly T158280, select the
  'ConfigurationManager' and double click the "Default [
  T158280 ]" Configuration to activate this Configuration.
  12) Select again the DMT and perfrom a CheckOut on the
  SubAssembly T158280 via context Menu / Check Out => Rebuild
  message appears ? click to YES
  13) Tile the Window horizontally via Fk Window / Tile
  Horizontally
  14) In the window with the new RootAssembly, select the
  'FeatureManager design tree'
  . - Select the SubAssembly T158280 with the context menu /
  Component Properties
  . . - Select the configuration "middenstand" and OK
  15) In the window with the SubAssembly T158280, select the
  Assembly T158280 with the context menu / Check In
  16) In the new RootAssembly, select the DMT
  17) Select the + (Plus-Sign) in front of the Assembly T158280
  Current Result- => SolidWorks crashes with no additional
  information or error message
  Expected Result :- Crash should not appear
  

Local fix

• empty
  

Problem summary

• Customer Scenario:- (Please go through the Preparation Steps
  to reproduce this issue)
  1) Clear the Work directory
  2) Open the Assembly T158280 Rev E.00 (Checked In) as
  Read-Only via context menu / Open For... / Open as read-only,
  select the Configuration "Mal open" and OK
  3) In SolidWorks Fk "File / Make Assembly from Assembly" and
  place the Object
  4) In the new RootAssembly, select the 'ConfigurationManager'
  and select the 'Default' configuration with the context menu
  / Add Derived Configuration...
  . - Create a Derived configuration named "test"
  5) In SolidWorks Fk "Insert / Component / Existing
  Part/Assembly...
  . - Select Browse...
  . - Search for the Assembly T1200697 (T1200223) and select OK
  to place it in the RootAssembly
  6) Insert the same Assembly T1200697 (T1200223) again to the
  RootAssembly
  7) Select the DMT
  8) Perform a SmarTeam / Save Operation
  -> During the save operation, SmarTeam tries to save the
  ReadOnly Asm T158280. Select Cancel to not save the assembly.
  9) Close the SmarTeam ProfileCard
  10) In the DMT, select the SubAssembly T158280 with the
  context menu / Open T158280.sldasm
  11) In this SubAssembly T158280, select the
  'ConfigurationManager' and double click the "Default [
  T158280 ]" Configuration to activate this Configuration.
  12) Select again the DMT and perfrom a CheckOut on the
  SubAssembly T158280 via context Menu / Check Out => Rebuild
  message appears ??? click to YES
  13) Tile the Window horizontally via Fk Window / Tile
  Horizontally
  14) In the window with the new RootAssembly, select the
  'FeatureManager design tree'
  . - Select the SubAssembly T158280 with the context menu /
  Component Properties
  . . - Select the configuration "middenstand" and OK
  15) In the window with the SubAssembly T158280, select the
  Assembly T158280 with the context menu / Check In
  16) In the new RootAssembly, select the DMT
  17) Select the + (Plus-Sign) in front of the Assembly T158280
  Current Result- => SolidWorks crashes with no additional
  information or error message
  Expected Result :- Crash should not appear
  

Problem conclusion

• NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP7.
  Additional Closure Information:
  Issue is fixed with SmarTeam V5R20 SP7
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  SMARTEAM NT>XP

• Fixed component ID

  569199970

Applicable component levels

• R520 PSN

     UP