HE08136: MEASURE INERTIA BOUNDING BOX VALUES KO BY FACTOR OF 1K WHEN MULT IPLE BODIES ARE SELECTED

APAR status

• Closed as program error.

Error description

• Abstract:
  Measure Inertia bounding box values is Wrong by factor of 1k
  (1000) when multiple bodies are selected.
  Scenario:
  0. Start CATIA V5R21
  1. Create a new part
  2. Activate the PartBody
  3. Create a closed box sketch
  4. Create a Pad from the sketch
  5. Create another Body (Activate this Body)
  6. Create a closed box sketch
  7. Create a Pad from the sketch
  8. Create a 3D Inertia measurement ? Select the PartBody and
  then hold control and select the other Body. (The measurement
  now contains both inputs)
  9. Click the f(x) and select the InertiaVolume at the bottom
  of the spec tree.
  10. There are 6 attributes which are incorrect BBOx, BBOy,
  BBOz, BBLx, BBLy, BBLz and if you multiple these values by
  1000, they are correct. BBO represents the Bounding Box
  Origin point and BBL represents the lengths of the box from
  the origin point along the inertia axes.
  Result:
  There are 6 attributes which are incorrect BBOx, BBOy, BBOz,
  BBLx, BBLy, BBLz.
  Expected result:
  Measure Inertia bounding box values should be correct by
  factor when multiple bodies are selected.
  

Local fix

• empty
  

Problem summary

• Abstract:
  Measure Inertia bounding box values is Wrong by factor of 1k
  (1000) when multiple bodies are selected.
  Scenario:
  0. Start CATIA V5R21
  1. Create a new part
  2. Activate the PartBody
  3. Create a closed box sketch
  4. Create a Pad from the sketch
  5. Create another Body (Activate this Body)
  6. Create a closed box sketch
  7. Create a Pad from the sketch
  8. Create a 3D Inertia measurement ??? Select the PartBody and
  then hold control and select the other Body. (The measurement
  now contains both inputs)
  9. Click the f(x) and select the InertiaVolume at the bottom
  of the spec tree.
  10. There are 6 attributes which are incorrect BBOx, BBOy,
  BBOz, BBLx, BBLy, BBLz and if you multiple these values by
  1000, they are correct. BBO represents the Bounding Box
  Origin point and BBL represents the lengths of the box from
  the origin point along the inertia axes.
  Result:
  There are 6 attributes which are incorrect BBOx, BBOy, BBOz,
  BBLx, BBLy, BBLz.
  Expected result:
  Measure Inertia bounding box values should be correct by
  factor when multiple bodies are selected.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON I-PLM Collaborative Innovation
  VERSION V5-6R2012 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP7.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R21 SP2.
  Additional Closure Information:
  Incident Diagnosis:
  Measure Inertia bounding box values KO by factor of 1k when
  multiple bodies are selected
  Reason:
  Actually the there was a problem in the bounding box
  computation of measure and which has been corrected
  now.However, the problem is fixed when a new measure created.
  Important Note:
  There was a problem in the bounding box computation which has
  been corrected now(V5R21SP2 level), but this will be
  effective only for measures created with the new algorithm.
  i.e., the measure which were already created will use the old
  algorithm will not update, because of the version saved in
  side the measure feature. so new algorithm will only called
  for the newly created measures.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R520 PSN

     UP