HE08063: In Workbench Gernerative Shape design, a tiny circle is judged a s gap mistakenly, which gives fill surface error.

APAR status

• Closed as program error.

Error description

• .
  SCENARIO:
  1. Open Catia V5
  2. Create a new CATPart
  Workbench-Generative Shape Design
  3. Select circle command
  Circle definition dialog box appears
  4.  Select circle type as centre and radius, centre by creating
  point at x=0, y=0, z=0, support as YZ plane, radius as 0.51mm an
  d whole circle as circle limitation and Click ok.
  5. Select Fill command.
  6. Select circle and put deviation value as 0.005mm.
  Update error message appears
  As
  ???Update Error
  Fill.1
  The Fill failed.
  There is a continuity gap of 1.02mm between elements.
  Try to improve your geometry.???
  .
  PROBLEM:
  The fill failed. There is a continuity gap of 1.02mm between ele
  ments.
  .
  EXPECTED RESULT:
  The fill should be done without error.
  

Local fix

• empty
  

Problem summary

• .
  SCENARIO:
  1. Open Catia V5
  2. Create a new CATPart
  Workbench-Generative Shape Design
  3. Select circle command
  Circle definition dialog box appears
  4.  Select circle type as centre and radius, centre by
  creating point at x=0, y=0, z=0, support as YZ plane, radius
  as 0.51mm and whole circle as circle limitation and Click ok.
  5. Select Fill command.
  6. Select circle and put deviation value as 0.005mm.
  Update error message appears
  As
  ???Update Error
  Fill.1
  The Fill failed.
  There is a continuity gap of 1.02mm between elements.
  Try to improve your geometry.???
  .
  PROBLEM:
  The fill failed. There is a continuity gap of 1.02mm between
  elements.
  .
  EXPECTED RESULT:
  The fill should be done without error.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA  VERSION V5R22 GA level.
  Additional Closure Information:
  Technical explanation of the defect:
  In deviation is ON,a tiny circle is judged as gap mistakenly,
  which brings fill surface error.
  Technical explanation of the correction:
  The correction has been done so that fill should be done
  without error.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R521 PSN

     UP