HE07357: EXPORT AS STEP FILE WITH OPTION "LINKS TO CATIA" DON'T WORK ON A YM2 LICENSE.

APAR status

• Closed as program error.

Error description

• Scenario:
  1)Open CATIA with YM2 license configuration.
  2)Go to TOOLS/OPTIONS/COMPATIBILITY/STEP/EXPORT
  3)Check the option "Assemblies:links to CATIA"
  4)Save the Product as stp.
  Problem:
  Geometry is also exported as like "One Step File" option.
  Expected Result:
  Option should work correctly.only links should be kept in the
  stp file.
  

Local fix

• empty
  

Problem summary

• Scenario:
  1)Open CATIA with YM2 license configuration.
  2)Go to TOOLS/OPTIONS/COMPATIBILITY/STEP/EXPORT
  3)Check the option "Assemblies:links to CATIA"
  4)Save the Product as stp.
  Problem:
  Geometry is also exported as like "One Step File" option.
  Expected Result:
  Option should work correctly.only links should be kept in the
  stp file.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION 5 R22 GA.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP7.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R21 SP2.
  Additional Closure Information:
  Incident Diagnosis:
  Export as STEP file with option "Links to CATIA" don't work
  on a YM2 License.
  Technical explanation of the defect:
  Problem in license management.Related code was correctly
  updated.
  Technical explanation of the correction:
  Code has been updated now.Export as STEP file with option
  "Links to CATIA" is possible now with YM2 licenses.
  Possible by-pass and/or correction limitation:
  Install SXT license.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN

     UP