HE07265: Generative Sheetmetal Design - Error 0x00000001 during Update

APAR status

• Closed as unreproducible in next release.

Error description

• Scenario :
  1- File / Open the CATPart file
  2- Go to Generative Sheetmetal Design workbench
  3- Edit the Sketch and change the diameter of the circle
  4- Exit the Sketcher
  5- Update the Part
  Result :
  It leads to an "Update Error" during Update : "No entry found fo
  r error id 0x00000001"
  We get the same error with these operations :
  Go to File / Desk / CATDUA, clean the Part and Update the Part
  

Local fix

• empty
  

Problem summary

• Scenario :
  1- File / Open the CATPart file
  2- Go to Generative Sheetmetal Design workbench
  3- Edit the Sketch and change the diameter of the circle
  4- Exit the Sketcher
  5- Update the Part
  Result :
  It leads to an "Update Error" during Update : "No entry found
  for error id 0x00000001"
  We get the same error with these operations :
  Go to File / Desk / CATDUA, clean the Part and Update the Part
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
      CATIA VERSION V5R19.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
      CATIA VERSION V5R21 SP1.
  Additional Closure Information:
  Incident Diagnosis:
  Generative Sheetmetal Design - Error 0x00000001 during Update
  Technical Reason:
  In the provided CATPart the sheetmetal transformation data is
  missing for the Flange.1 feature.
  So, in order to correct this, we must update the whole
  CATPart to get the correct transformation data (by using the
  input power command c: force update) or change Sheet Metal
  Parameters Thickness from 2mm to 3mm and then back to 2mm.
  Now, if we edit the Wall.2 feature it will build correctly.
  .
  Sheetmetal transformation data is missing for the Flange.1
  feature is due to a problem during creation on user side.
  The design is correct; but as we do not know how the customer
  creates this part or save this part, we cannot give the
  origin of this problem.
  So, to investigate further, we need to get the scenario of
  creation of this Part.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R521 PSN SP52101

     UP11/07/18 I 1000