HE07002: PS : BOM : VISUALISE IN BILL OF MATERIALS IS NOT KEPT.

APAR status

• Closed as Permanent restriction.

Error description

• Scenario:
  Data Specific.
  In a Specific CATProduct user opens the properties of an
  particular Instance and checks the checkbox "Visualise in
  Bill of Materials' and confirms OK. On reopnening the
  properties for the same instance again the checkbox
  "Visualise in Bill of Materials" remains Unchecked.
  Problem:
  "Visualise in Bill Of Materials" is unchecked. Further more
  if the user creates a view in a CATDrawing, the BOM created
  by Advanced BOM has the component even if the visualization
  in BOM is not active on any instance.
  Expected result:
  The Checkbox "Visualise in Bill of Materials" must be checked
  and the BOM must not be created when the visualization in BOM
  is not active on any Instance.
  

Local fix

• empty
  

Problem summary

• Scenario:
  Data Specific.
  In a Specific CATProduct user opens the properties of an
  particular Instance and checks the checkbox "Visualise in
  Bill of Materials' and confirms OK. On reopnening the
  properties for the same instance again the checkbox
  "Visualise in Bill of Materials" remains Unchecked.
  Problem:
  "Visualise in Bill Of Materials" is unchecked. Further more
  if the user creates a view in a CATDrawing, the BOM created
  by Advanced BOM has the component even if the visualization
  in BOM is not active on any instance.
  Expected result:
  The Checkbox "Visualise in Bill of Materials" must be checked
  and the BOM must not be created when the visualization in BOM
  is not active on any Instance.
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN CATIA
  Additional Closure Information:
  Incident Diagnosis:
  Visualise in Bill Of Material is not kept.
  Reason:
  To visualise Bill Of Material ,any Assembly Product needs to
  have certain attributes defined in CATIA.
  With the customer data provided ,it is a part (not a type of
  Assembly Product supported by CATIA)in which the required
  attribute is missing.Thus not possible to visualise the BOM
  for that particular part.
  Also, CATDUA can work on only Assembly Product defined by
  DS,thus the data can not be corrected, Since the part made by
  the customer is not made as per the standards of CATIA.
  Hence the issue can be closed as Permanent Restriction.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels