HE05967: FEATURE DRIVEN PATTERN CRASHES SOLIDWORKS ON WIN7 OS

APAR status

• Closed as unreproducible in next release.

Error description

• ABSTRACT: Feature driven pattern crashes SolidWorks on Win7 OS
  .
  SCENARIO:
  1. Copy the contents of the "For Azeem!" folder contained in
  the attached "For_Azeem_.rar" file into the SmarTeam Work
  folder.
  2. Launch SolidWorks and login to SmarTeam when prompted.
  3. Perform a File -> Open to open the "Part with Pattern"
  SolidWorks Assembly found in the SmarTeam Work folder.
  4. Select Insert -> Component Pattern... -> Feature Driven...
  5. Click on the Components to Pattern field in the Feature
  Driven toolbar on the left. Then click on the Plank found in
  the assembly.
  6. Click on the Driving Feature field in the Feature Driven
  tool bar. Then locate one of the holes in the "Support_Frame"
  Assembly (Support_Leg<2>).
  7.  Click in the Support Frame again.
  ==> The Driving Feature field is filled and the shape of the
  Seed Feature is replicated down the Support Frame in
  allignment with the holes therein.
  8. Click on the green check mark to complete replication of
  the Feature Driven Pattern across the Assembly.
  ==> SolidWorks Crashed
  NOTES:
  1. The environment is V5R20 SP5 + SW 2011 3.0 -64bit on Win 7
  64-bit O/S.
  2. Refer to the movie of the scenario in the attachemnt file
  "capture-1.avi" found in the attached ZIP file
  "For_Azeem_.rar".
  3. With V5R20SP4 + SW Premium 2011 SP2.0 -64bit on XP Pro x64
  V2003 SP2, the Feature driven pattern does replicate across
  the Assembly (see attachment file "Correct Results.jpg"), but
  then the OS slows to a crawl, virtually to the point of being
  hung up. This is also a problem...
  4. Refer to BR10000103967 -- SWI : Solidworks 2010 crashes
  with Smarteam V5R20SP5 when using the Feature Driven
  Component Pattern in SolidWorks
  .
  RESULT:- Solidworks Crashes. This problem doesn't occur with
  standalone Solidworks., it occurs only with SmarTeam
  Integration.
  .
  

Local fix

• empty
  

Problem summary

• ABSTRACT: Feature driven pattern crashes SolidWorks on Win7 OS
  .
  SCENARIO:
  1. Copy the contents of the "For Azeem!" folder contained in
  the attached "For_Azeem_.rar" file into the SmarTeam Work
  folder.
  2. Launch SolidWorks and login to SmarTeam when prompted.
  3. Perform a File -> Open to open the "Part with Pattern"
  SolidWorks Assembly found in the SmarTeam Work folder.
  4. Select Insert -> Component Pattern... -> Feature Driven...
  5. Click on the Components to Pattern field in the Feature
  Driven toolbar on the left. Then click on the Plank found in
  the assembly.
  6. Click on the Driving Feature field in the Feature Driven
  tool bar. Then locate one of the holes in the "Support_Frame"
  Assembly (Support_Leg<2>).
  7.  Click in the Support Frame again.
  ==> The Driving Feature field is filled and the shape of the
  Seed Feature is replicated down the Support Frame in
  allignment with the holes therein.
  8. Click on the green check mark to complete replication of
  the Feature Driven Pattern across the Assembly.
  ==> SolidWorks Crashed
  NOTES:
  1. The environment is V5R20 SP5 + SW 2011 3.0 -64bit on Win 7
  64-bit O/S.
  2. Refer to the movie of the scenario in the attachemnt file
  "capture-1.avi" found in the attached ZIP file
  "For_Azeem_.rar".
  3. With V5R20SP4 + SW Premium 2011 SP2.0 -64bit on XP Pro x64
  V2003 SP2, the Feature driven pattern does replicate across
  the Assembly (see attachment file "Correct Results.jpg"), but
  then the OS slows to a crawl, virtually to the point of being
  hung up. This is also a problem...
  4. Refer to BR10000103967 -- SWI : Solidworks 2010 crashes
  with Smarteam V5R20SP5 when using the Feature Driven
  Component Pattern in SolidWorks
  .
  RESULT:- Solidworks Crashes. This problem doesn't occur with
  standalone Solidworks., it occurs only with SmarTeam
  Integration.
  .
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
      I-PLM Collaborative Innovation VERSION V5R20.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  I-PLM Collaborative Innovation VERSION V5R21 GA level
  I-PLM Collaborative Innovation VERSION V5R20 SP6.
  Additional Closure Information:
  Reported scenario is Unreproducible in R20 SP6 Level and
  above.
  Closure Information -
  Configuration details are properly passed from SmarTeam to
  SolidWorks.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  SMARTEAM NT>XP

• Fixed component ID

  569199970

Applicable component levels

• R520 PSN

     UP