HE05616: DWG TRUE VIEW2010 STARTS INSTEAD OF AUTOCAD MECHANICAL 2010 BY E DIT OPERATION.

APAR status

• Closed as unreproducible in next release.

Error description

• Abstract: DWG True View2010 starts instead of AutoCAD
  Mechanical 2010 by Edit operation
  Scenario:
  Preparation:
  1. Tools/Application Setup
  2. Select AutoCAD
     Select "Tools" button
  3.  select" Edit" tab select Modify, confirm the selected
  application is "Autocad drawing"
  4. Select "View" tab select Modify, confirm the selected
  application is "DWG TRUEVIEW 2010"
  5. Select "Print" tab, select Modify, confirm the selected
  application is " DWG TRUEVIEW 2010"
  close
  6. Smarteam menu View/View Options
     Check ON "Perform operation on double click" option in
  General tab
     Operation: Open
  .
  Scenario steps:
  1. Start SmarTeam Editor V5R19SP9
  2. Select Checked In AutoCAD Drawing
  3. Select "File Operation -> Print" from context menu
     ===> Start "DWG True View2010" (OK)
  4. Double click AutoCAD Drawing
  .
  RESULT:   ===> Start "DWG True View2010" instead of "AutoCAD
  Mechanical 2010" (NG)
  .
  Expected result:
  AutoCAD Mechanical 2010 should be start by Edit operation on
  step4.
  

Local fix

• empty
  

Problem summary

• Abstract: DWG True View2010 starts instead of AutoCAD
  Mechanical 2010 by Edit operation
  Scenario:
  Preparation:
  1. Tools/Application Setup
  2. Select AutoCAD
     Select "Tools" button
  3.  select" Edit" tab select Modify, confirm the selected
  application is "Autocad drawing"
  4. Select "View" tab select Modify, confirm the selected
  application is "DWG TRUEVIEW 2010"
  5. Select "Print" tab, select Modify, confirm the selected
  application is " DWG TRUEVIEW 2010"
  close
  6. Smarteam menu View/View Options
     Check ON "Perform operation on double click" option in
  General tab
     Operation: Open
  .
  Scenario steps:
  1. Start SmarTeam Editor V5R19SP9
  2. Select Checked In AutoCAD Drawing
  3. Select "File Operation -> Print" from context menu
     ===> Start "DWG True View2010" (OK)
  4. Double click AutoCAD Drawing
  .
  RESULT:   ===> Start "DWG True View2010" instead of "AutoCAD
  Mechanical 2010" (NG)
  .
  Expected result:
  AutoCAD Mechanical 2010 should be start by Edit operation on
  step4.
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
      I-PLM Collaborative Innovation VERSION V5R19.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  I-PLM Collaborative Innovation VERSION V5R20 SP6.
  Additional Closure Information:
  THE PROBLEM WAS SUBMITTED ON :
  ENOVIA SMARTEAM  V5R19.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  ENOVIA SMARTEAM VERSION V5R21GA LEVEL AND ON V5R20SP6.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  SMARTEAM NT>XP

• Fixed component ID

  569199970

Applicable component levels

• R520 PSN

     UP