HE05312: GSD:THE DISPLAYED PARAMETER BY THE " MATING FLANGE" IN GEOMETRY AREA CAN NOT BE EDITED

APAR status

• Closed as program error.

Error description

• SCENARIO:
  On running Edit-Scan, some parameters of all features
  aggregated under the "Mating Flange" feature are not possible
  to edit in 3d area.
  .
  EXPECTED RESULT:
  On running Edit-Scan, some parameters of all features
  aggregated under the "Mating Flange" feature should be
  possible to edit in 3d area.
  

Local fix

• empty
  

Problem summary

• SCENARIO:
   On running Edit-Scan, some parameters of all features
  aggregated under the "Mating Flange" feature are not possible
  to edit in 3d area.
  .
  EXPECTED RESULT:
  On running Edit-Scan, some parameters of all features
  aggregated under the "Mating Flange" feature should be
  possible to edit in 3d area.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA  VERSION V5R21 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP6.
  Additional Closure Information:
  Incident Diagnosis:
  The displayed parameter by the " Mating Flange" in geometry
  area can not be edited
  .
  Correction Explanation:
  On running Edit-Scan, parameters of all features aggregated
  under the "Mating Flange" feature can be edited in 3d area.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN

     UP