HE05254: EXITING SKETCH GENERATES "NO ENTRY FOUND FOR ERROR ID 0X000003E9"

APAR status

• Closed as program error.

Error description

• Scenario is DATA specific.
  Scenario:
  1. Open the CATPart.
  2. Modify the sketch in the part body.
  3. Use "Project 3D Elements" feature.
  4. Exit sketch.
  Result Obtained:
  After creating the profile sketch for a part's body, an error
  is given when exiting the sketch:"No entry found for error ID
  0x000003e9".
  Entering and exiting the sketch again, CATIA Does not report
  the same error again. No apparent impact on operations.
  Expected Result:
  Error message should not be obtained.
  

Local fix

• empty
  

Problem summary

• Scenario is DATA specific.
  Scenario:
  1. Open the CATPart.
  2. Modify the sketch in the part body.
  3. Use "Project 3D Elements" feature.
  4. Exit sketch.
  Result Obtained:
  After creating the profile sketch for a part's body, an error
  is given when exiting the sketch:"No entry found for error ID
  0x000003e9".
  Entering and exiting the sketch again, CATIA Does not report
  the same error again. No apparent impact on operations.
  Expected Result:
  Error message should not be obtained.
  

Problem conclusion

• NOTE THAT THIS PROBLEM HAS BEEN FIXED ON V5R21 SP1 level.
  Additional Closure Information:
  INCIDENT DIAGNOSIS:
  Exiting Sketch Generates "No entry found for error ID
  0x000003e9"
  CLOSURE DESCRIPTION:
  The error is caught and flushed.
  No more error message is thrown.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R521 PSN SP52101

     UP11/07/18 I 1000