HE05169: GSMD: SURFACE STAMP : SURFACE STAMP FAILS DURING FORCE UPDATE.

APAR status

• Closed as program error.

Error description

• SCENARIO:
  User data contains Surface stamp feature.
  If user try to modify Surface Stamp by changing the Height H
  from 2 to 1mm and again change Height H from 1 to 2mm
  (initial value), update error appear as follows.
  "Update Error
  Surface Stamp.XX The punch can not be built.
  Check the profile position and the input parameters values."-
  This is the problem
  EXPECTED RESULT:
  Surface stamp should not fail during update.
  

Local fix

• empty
  

Problem summary

• SCENARIO:
  User data contains Surface stamp feature.
  If user try to modify Surface Stamp by changing the Height H
  from 2 to 1mm and again change Height H from 1 to 2mm
  (initial value), update error appear as follows.
  "Update Error
  Surface Stamp.XX The punch can not be built.
  Check the profile position and the input parameters values."-
  This is the problem
  EXPECTED RESULT:
  Surface stamp should not fail during update.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R21 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP6.
  Additional Closure Information:
  .
  Technical explanation of the defect:
  Surface Stamp fails during force update.
  .
  Technical explanation of the correction:
  The correction has been done so that Surface Stamp does not
  fail during force update. Correction is versioned and hence
  it will be available for newly created stamp features only.
  It is necessary to re-create Surface stamps(Surface Stamp.1,2
  &3) before replaying the scenario.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN

     UP