HE03768: AXIS SYSTEMS IN NO SHOW ARE EXPORTED TO STEP

APAR status

• Closed as unreproducible in next release.

Error description

• Scenario:
  1. Launch CATIA with ST1 license
  2. Go to Tools / Options / General / Compatibility / STEP and
  choose the following options:
  > Application Protocol: 214 iso
  > Show/NoShow: Keep unchecked Export also Noshow entities
  3. Open CATPart (with Axis system in Show and NoShow)
  4. Save as stp
  5. Open the stp file
  => PROBLEM: The axis system from NoShow has been exported too
  => EXPECTED RESULT: The axis system from NoShow should not be
  exported
  .
  

Local fix

• empty
  

Problem summary

• Scenario:
  1. Launch CATIA with ST1 license
  2. Go to Tools / Options / General / Compatibility / STEP and
  choose the following options:
  > Application Protocol: 214 iso
  > Show/NoShow: Keep unchecked Export also Noshow entities
  3. Open CATPart (with Axis system in Show and NoShow)
  4. Save as stp
  5. Open the stp file
  => PROBLEM: The axis system from NoShow has been exported too
  => EXPECTED RESULT: The axis system from NoShow should not be
  exported
  .
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
  CATIA VERSION V5R19.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION V5R21 GA level
  CATIA VERSION V5R20 SP6.
  Additional Closure Information:
  .
  Scenario reproduced on reported V5R20SP04 level. Scenario
  does not reproduce on above mentioned levels.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN

     UP