HE03610: CATIA is frozen when datum axis system is deleted.

APAR status

• Closed as program error.

Error description

• SCENARIO:
  (Problem is data specific)
  A CATPart contains datum axis system and it needs update. Try to
   delete axis system, axis system is deleted from geometry but is
   seen in specification tree. CATIA gets freeze and nothing is po
  ssible to perform. If any command is selected its icon gets free
  ze.
  .
  EXPECTED RESULT:
  CATIA should not freeze after deleting axis system.
  

Local fix

• empty
  

Problem summary

• SCENARIO:
  (Problem is data specific)
  A CATPart contains datum axis system and it needs update. Try
  to delete axis system, axis system is deleted from geometry
  but is seen in specification tree. CATIA gets freeze and
  nothing is possible to perform. If any command is selected
  its icon gets freeze.
  .
  EXPECTED RESULT:
  CATIA should not freeze after deleting axis system.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R21 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP6.
  Additional Closure Information:
  .
  INCIDENT DIAGNOSIS:
  CATIA gets freeze when datum axis system is deleted.
  .
  CORRECTION EXPLANATION:
  Problem is due to corrupted data. Correction has been
  provided in cleaner rule UAV_18 to detect such corruption. It
  removes the invalid representation.
  To get the scenario work on given data below steps must be
  performed on the data,
  - Clean
  - Save
  - Reopen
  .
  ADDITIONAL INFORMATION:
  Save and reopen is mandatory. Scenario will not work
  immediately after cleaning (without save & re-open)
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R520 PSN

     UP