HE03391: LoadPropertiesOnOpen cause permanetly save operations on checked in files

APAR status

• Closed as program error.

Error description

• I have been able to reproduce this issue on my side with the sce
  nario provided by the customer as shown in the attached video-fi
  le "SR00044333.zip".
  The problem is due to the mapping defined in the Mapping Group T
  ype "Summary Information" for the properties 'Title', 'Author' a
  nd 'Comments'.
  If I remove these mappings or if I uncheck the option "Enable up
  dating of property", the problem no longer occurs.
  Scenario:
  - Attach customers PLMDB
  - Make sure, the ConfigurationSetting "SolidWorks.LoadProperties
  OnOpen" is set to YES
  - Launch SolidWorks 2010SP4.0 and connect to SmarTeam V5R20SP4 a
  s user admin (password: admin)
  - Create a simple Part, save it to SmarTeam and perform a Check
  In operation
  - Open the SW-Part as Read Only
  => The following message appears
  SMARTEAM
  . Part "PRT-xxx-xxx .0 PRT-xxx Checked In" has
  . been modified. Click here, or run "Modified Components"
  . command to repair
  This message is incorrect, as the Part and the attributes have N
  OT been modified.
  

Local fix

• empty
  

Problem summary

• I have been able to reproduce this issue on my side with the
  scenario provided by the customer as shown in the attached
  video-file "SR00044333.zip".
  The problem is due to the mapping defined in the Mapping
  Group Type "Summary Information" for the properties 'Title',
  'Author' and 'Comments'.
  If I remove these mappings or if I uncheck the option "Enable
  updating of property", the problem no longer occurs.
  Scenario:
  - Attach customers PLMDB
  - Make sure, the ConfigurationSetting
  "SolidWorks.LoadPropertiesOnOpen" is set to YES
  - Launch SolidWorks 2010SP4.0 and connect to SmarTeam
  V5R20SP4 as user admin (password: admin)
  - Create a simple Part, save it to SmarTeam and perform a
  Check In operation
  - Open the SW-Part as Read Only
  => The following message appears
  SMARTEAM
  . Part "PRT-xxx-xxx .0 PRT-xxx Checked In" has
  . been modified. Click here, or run "Modified Components"
  . command to repair
  This message is incorrect, as the Part and the attributes
  have NOT been modified.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON I-PLM Collaborative Innovation
  VERSION V5R21 GA level.
  Additional Closure Information:
  -
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  SMARTEAM NT>XP

• Fixed component ID

  569199970

Applicable component levels

• R521 PSN

     UP