HE01521: BIW-WP DEFECT-035- BNR ON PARTS WITH CROSS DOC LINKS HAS INCONSI STENT BEHAVIOR AND RESULTS.

APAR status

• Closed as user error.

Error description

• Scenario:
  1. Launch CATIA R20SP3 VPMNav and go to Hanger workbench.
  2. Create a root product with multiple workpackages
  (containing Hangers and Lofts) having cross doc connections
  between them.
  3. Save the product in ENOVIA.
  4. Load a specific workpackage in VPMNav and perform BNR.
  Concern: The behavior of BNR is inconsistent
  Expected Result: The behavior of VPMNav should be consistent.
  

Local fix

• empty
  

Problem summary

Problem conclusion

Temporary fix

Comments

• Incident Diagnosis:
  Free text mentioned issue as generic. However, the problem
  was not reproducible on generic
  data. IR creator mentioned problem exists for specific case
  of (Hgr- 101N-M1079). Upon
  analyzing this case, it was found that there were 2 lofts
  (Loft_8b086a0e_13e4_4b17d6b1_b0d69 ,
  Loft_5ac540cb_900_4c16263d_2d638)between same set of
  hangers (Hgr- 101N-M1079 and (Hgr- 101N-M1078)). When the
  duplicate loft is removed, the
  reported problem no longer exists.
  Correct Application:
  Don???t create a loft between two hangers which already contain
  a loft between them.
  Documentation:
  Manual
  Reference:http://dsdoc/doc20ga/online/ecrug_C2/ecrugbt1001.htm
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels