HE00560: DRAFTING - BEND LINES ARE MISSING IN UNFOLDED VIEW CREATED FROM SHEETMETAL PART

APAR status

• Closed as Permanent restriction.

Error description

• Scenario :
  1- File / Open the CATPart file in Generative Sheetmetal
  Design workbench
  The Part contains three Bodies (two Sheetmetal bodies and one
  Part body)
  2- File / New / Drawing
  3- Create the Unfolded View from the Sheetmetal Part
  Result :
  No bend lines are created
  Expected result :
  Bend lines should be created.
  

Local fix

• empty
  

Problem summary

• Scenario :
  1- File / Open the CATPart file in Generative Sheetmetal
  Design workbench
  The Part contains three Bodies (two Sheetmetal bodies and one
  Part body)
  2- File / New / Drawing
  3- Create the Unfolded View from the Sheetmetal Part
  Result :
  No bend lines are created
  Expected result :
  Bend lines should be created.
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN CATIA
  Additional Closure Information:
  Incident Diagnosis:
  Drafting lines of Sheetmetal part inside Assemble features
  are not displayed in unfolded view of related drawing.
  Reason:
  Assemble feature don't have unfolded view. That's why the
  drafting lines computation is failing as the unfolded view is
  required to compute them and last feature is the assemble
  one.
  By-Pass:
  Remove assemble features. Then the creation of drafting lines
  is working fine.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels