HE00384: PART : THE ERROR MESSAGE IS APPEARED WHEN THE SECOND PAD IS CREA TED ON THE FACE OF THE PAD WHICH WAS CREATED BY THE PROFILE THAT

APAR status

• Closed as program error.

Error description

• SCENARIO:
  1.Open CATPart. Create a closed Sketch.1. This sketch must
  have few elements tangent to each other.
  2.Double click Sketch.1.
  3.Select Tool s \  Sketch Analysis.
  4.See the warning on Sketch Analysis dialog box.=> You can
  confirm once again that the profile is crossing.
  5.Close Sketch Analysis dialog box and exit from Sketcher
  workbench.
  6.Click Pad icon.
  7.Confirm that Sketch.1 is selected as a profile. If Sketch.1
  is not selected, select it.
  8.Click OK button on Pad Definition dialog box.=> You can see
  that a new pad was created.
  9.Click Sketch icon .
  10.Select the one of flat face of earlier created Pad
  11.Create a rectangle .
  12.Exit from Sketcher Workbench.
  13.Click Pad icon.
  14.Confirm that Sketch.2 is selected as a profile. If
  Sketch.2 is not selected, select it.
  15.Click OK button on Pad Definition dialog box.
  => TROUBLE OCCURS !
  =>  The error message is appeared.
  EXPECTED RESULT:
  Pad should be created at step15. In case Pad is not feasible,
  error message should be elaborate to convey the exact root
  cause.
  .
  

Local fix

• empty
  

Problem summary

• SCENARIO:
  1.Open CATPart. Create a closed Sketch.1. This sketch must
  have few elements tangent to each other.
  2.Double click Sketch.1.
  3.Select Tool s \  Sketch Analysis.
  4.See the warning on Sketch Analysis dialog box.=> You can
  confirm once again that the profile is crossing.
  5.Close Sketch Analysis dialog box and exit from Sketcher
  workbench.
  6.Click Pad icon.
  7.Confirm that Sketch.1 is selected as a profile. If Sketch.1
  is not selected, select it.
  8.Click OK button on Pad Definition dialog box.=> You can see
  that a new pad was created.
  9.Click Sketch icon .
  10.Select the one of flat face of earlier created Pad
  11.Create a rectangle .
  12.Exit from Sketcher Workbench.
  13.Click Pad icon.
  14.Confirm that Sketch.2 is selected as a profile. If
  Sketch.2 is not selected, select it.
  15.Click OK button on Pad Definition dialog box.
  => TROUBLE OCCURS !
  =>  The error message is appeared.
  EXPECTED RESULT:
  Pad should be created at step15. In case Pad is not feasible,
  error message should be elaborate to convey the exact root
  cause.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R21 GA level.
  Additional Closure Information:
  Incident Diagnosis:
  Pad not possible on surface of pad created out of profile
  having contacting edges.
  Correction explanation:
  Versioned correction has been delivered to calculate pad
  created out of contacting edges.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R521 PSN

     UP