HE00323: PART: "Remove face" can not be created to a specific solid

APAR status

• Closed as program error.

Error description

• SCENARIO IS DATA SPECIFIC:
  SCENARIO DESCRIPTION:
  1.Open CATPart in Part Design work-bench.
  2.Delete the Split operation which was created on CATPart using
  Plane.
  3.Click Edit in the Update Diagnosis window.
  4.Select fillet faces to add into the Face to remove.
  5.Click OK in the Update Definition dialog box.
  .
  Result:
  After step2 and after step5:
  Following error message occurs on Update Diagnosis dialog box.
  ???The final body cannot be closed with selected ignored faces.
  Curve extrapolation failed for too large gap generated.???
  .
  EXPECTED RESULT:
  The faces should be removed with no UPDATION error.
  .
  

Local fix

• empty
  

Problem summary

• SCENARIO IS DATA SPECIFIC:
  SCENARIO DESCRIPTION:
  1.Open CATPart in Part Design work-bench.
  2.Delete the Split operation which was created on CATPart
  using Plane.
  3.Click Edit in the Update Diagnosis window.
  4.Select fillet faces to add into the Face to remove.
  5.Click OK in the Update Definition dialog box.
  .
  Result:
  After step2 and after step5:
  Following error message occurs on Update Diagnosis dialog box.
  ???The final body cannot be closed with selected ignored faces.
  Curve extrapolation failed for too large gap generated.???
  .
  EXPECTED RESULT:
  The faces should be removed with no UPDATION error.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON Virtual Design  VERSION V5R21
  GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP5.
  Additional Closure Information:
  Incident Diagnosis:
  "Remove face" cannot be created to a specific solid.
  .
  Correction Explanation:
  Code has been modified.
  Correction is versioned correction.
  Before the delete operation ???Upgrade??? the RemoveFace feature
  
  then Delete the Split feature. Successful deletion occurs on
  ???Edit??? operation in ???Update Diagnosis??? (by selecting the
  
  remaining four faces).
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN

     UP