HD99322: DRAFTING / THE THREAD DISPLAY IS MISSING IN THE DRAWING AFTER GE NERATION

APAR status

• Closed as unreproducible in next release.

Error description

• SCENARIO:
  This scenario is specific to a  specific DATA..
  Open the CATPart.
  Create a new drawing and project the front view by selecting
  the XY plane.
  .
  A view is projected with some holes.
  go to property and select the option for displaying the
  Threads.
  .
  RESULTS:
  One hole is not visualized with thread representation.
  .
  EXPECTED RESULTS:
  All holes should be visualized with thread representation.
  

Local fix

• empty
  

Problem summary

• SCENARIO:
  This scenario is specific to a  specific DATA..
  Open the CATPart.
  Create a new drawing and project the front view by selecting
  the XY plane.
  .
  A view is projected with some holes.
  go to property and select the option for displaying the
  Threads.
  .
  RESULTS:
  One hole is not visualized with thread representation.
  .
  EXPECTED RESULTS:
  All holes should be visualized with thread representation.
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON CATIA VERSION V5R19.
  THIS PROBLEM IS NOT REPRODUCIBLE ON:
  CATIA VERSION V5R21 GA level
  CATIA VERSION V5R20 SP4.
  Additional Closure Information:
  INCIDENT DIAGNOSIS:
  The thread display is missing in the drawing after generation.
  .
  EXPLANATION
  The threads are displayed correctly in the R20SP04 and higher
  levels.
  This correction is by internal code enhancements.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP