HD99170: PART/ SMOOTHING OPTION NOT AVAILABLE WITHOUT CFO-LICENSE

APAR status

• Closed as program error.

Error description

• SCENARIO:
  .
  Make sure CFO license is not activated.
  Create a simple pad and apply some commands having Deviation
  parameters (smoothing) option viz. in Part Design - Shell,
  Thick Surface and in FMP- Thickness
  .
  RESULT OBTAINED:
  .
  The smoothing option in these cases is not available without
  CFO product license.
  .
  EXPECTED RESULT:
  .
  The smoothing option should be available without CFO product
  license.
  .
  

Local fix

• empty
  

Problem summary

• SCENARIO:
  .
  Make sure CFO license is not activated.
  Create a simple pad and apply some commands having Deviation
  parameters (smoothing) option viz. in Part Design - Shell,
  Thick Surface and in FMP- Thickness
  .
  RESULT OBTAINED:
  .
  The smoothing option in these cases is not available without
  CFO product license.
  .
  EXPECTED RESULT:
  .
  The smoothing option should be available without CFO product
  license.
  .
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R21 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R19 SP9.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP4.
  Additional Closure Information:
  INCIDENT DIAGNOSIS:
  .
  PART/ Smoothing option not available without CFO-license
  .
  JUSTIFICATION:
  .
  The code has been modified to get expected result.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R519 PSN

     UP