HD96937: GSD: SWEEP OPERATOR FAILS WHEN CREATING A BLEND SURFACE WITH CUR VATURE SUPPORT.

APAR status

• Closed as program error.

Error description

• SCENARIO:
  Blend fails when curvature is selected in First continuty and
  Second continuty option.
  Error messege displayed:
  Sweep Operator
  "The extrusion of the vertex of the profile leads to a cusp
  Use a guide with a smaller curvature."
  

Local fix

• empty
  

Problem summary

• SCENARIO:
  Blend fails when curvature is selected in First continuty and
  Second continuty option.
  Error messege displayed:
  Sweep Operator
  "The extrusion of the vertex of the profile leads to a cusp
  Use a guide with a smaller curvature."
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R21 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP3.
  Additional Closure Information:
  .
  INCIDENT DIAGNOSIS:
  Sweep operator fails when creating a blend surface with
  Curvature support.
  .
  CORRECTION EXPLANATION:
  The versioned correction has been done so that  Sweep
  operator does not fail while creating a blend surface with
  Curvature support. Recreate/Upgrade Blend feature to take
  benefit from the versioned correction.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN SP52003

     UP10/08/20 I 1000