HD96666: 2DL / PROJECT 3D ELEMENTS CANNOT BE PERFORMED TO SKETCH INCLUDIN G POINT AND LINE.

APAR status

• Closed as suggestion for future release.

Error description

• SCENARIO:
  In Tools / Options / Mechanical design / 2D layout for 3D
  design:
  Deactivate the Option "Create associative use-edges" in the
  geometry Tab.
  1. Open the CATPart containing some sketch elements and
  having a layout.
  2.  Double click on the "Layout".
  3. The LO1 window appears.
  4. Select the command "Project 3D Elements".
  5. Select the all sketch elements by dragging and dropping.
  .
  RESULTS:
  Sketch including Point and Line cannot be projected.
  .
  EXPECTED RESULTS:
  Project 3D Elements should be performed to Sketch including
  Point and Line.
  

Local fix

• empty
  

Problem summary

Problem conclusion

Temporary fix

Comments

• Dear Customer:  we have reviewed the problem report you
  submitted and determined that the function referenced is
  working within the scope of the original design
  specification. However we recognize the value of your
  feedback and will consider including resolution of this issue
  as a product enhancement in a future release, if one is made
  available.  We thank you for your input.
  Additional Closure Information:
  INCIDENT DIAGNOSIS:
  2DL / Project 3D Elements cannot be performed to Sketch
  including Point and Line..
  .
  EXPLANATION:
  This correction cannot be possible through defect channel and
  this would be a new enhancement to get expected behavior.
  BYPASS:
  Output capability allows to expose a point independently of
  whole Sketch result (profiles) so that both can be projected
  if needed.
  

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels