HD96267: DRAFTING(GENDRAFT) / OVERLOAD PROPERTIES" DOESN'T FUNCTION IN AP PROXIMATE VIEW

APAR status

• Closed as program error.

Error description

• 1. Start CATIA.
  2. Open a CATProduct containing a simple Model( A Cylindrical
  body).
  3. Create a CATDrawing.
  4. Create a Front View.
  5. Create a Broken View.
  6. Edit the Overload properties and select the Line 2 (Dashed
  line).
  7. Select Apply and Ok.
  8. Go to the Front View Properties/ View tab.
  9. Select Approximate in View generation Mode.
  .
  RESULTS:
  The Previously changed line type property changes back to
  default property.
  EXPECTED RESULTS:
  The Overload property should not change automatically by
  changing view generation mode to approximate.
  

Local fix

• empty
  

Problem summary

• 1. Start CATIA.
  2. Open a CATProduct containing a simple Model( A Cylindrical
  body).
  3. Create a CATDrawing.
  4. Create a Front View.
  5. Create a Broken View.
  6. Edit the Overload properties and select the Line 2 (Dashed
  line).
  7. Select Apply and Ok.
  8. Go to the Front View Properties/ View tab.
  9. Select Approximate in View generation Mode.
  .
  RESULTS:
  The Previously changed line type property changes back to
  default property.
  EXPECTED RESULTS:
  The Overload property should not change automatically by
  changing view generation mode to approximate.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON CATIA VERSION V5R21 GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON V5R20 SP3.
  Additional Closure Information:
  INCIDENT DIAGNOSIS:
  .
  DRAFTING(GENDRAFT) / Overload Properties" doesn't function in
  Approximate view
  .
  JUSTIFICATION:
  .
  The code has been modified to get expected result.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R519 PSN

     UP