HD96243: GSD: Max option in "Extremum" is not working

APAR status

• Closed as Permanent restriction.

Error description

• Process:
  
  0) Start CATIA.
  1) Open CATPart" in "Generative Shape Design" wb.
  2) Click "Extremum" icon. "Extremum Definition" dialog box is di
  splayed.
  3) Select one Curve as Element.
  
  4) Click "Direction:" on the cell by MB3.
  
  5) Select "X Component" by context menu. (Please confirm that "M
  ax" is selected as "Direction:".)
  6) Click "OK". "Extremum" was 1 point. But, "Max" option is not
  working. The position of a point does not change by "Max" or "Mi
  nimum". This is the problem.
  .
  Result to expect:
  
  "Extremum" of the max X direction should be created in the one s
  ide end of curve if the curve has length in the X directions. Ma
  x and Min options should work as desired.
  .
  

Local fix

• empty
  

Problem summary

• Process:
  
  0) Start CATIA.
  
  1) Open CATPart" in "Generative Shape Design" wb.
  2) Click "Extremum" icon. "Extremum Definition" dialog box is
  displayed.
  3) Select one Curve as Element.
  
  4) Click "Direction:" on the cell by MB3.
  
  5) Select "X Component" by context menu. (Please confirm that
  "Max" is selected as "Direction:".)
  6) Click "OK". "Extremum" was 1 point. But, "Max" option is
  not working. The position of a point does not change by "Max"
  or "Minimum". This is the problem.
  .
  Result to expect:
  
  "Extremum" of the max X direction should be created in the
  one side end of curve if the curve has length in the X
  directions. Max and Min options should work as desired.
  .
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN CATIA
  Additional Closure Information:
  Incident Diagnosis:
  The same point is solution for min and max extremum.
  .
  Correct Application:
  It is the correct point and a correct solution. The distance
  between one extremity and yz plane is 0.000887mm and the
  other one is 0.00000. So all the point of the curve can be
  solution for the 2 options (min and max) As the distance
  is under the resolution of CATIA.
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels