HD94535: SECONDARY WINDOW CLOSES AFTER CLICKING OK IN SECTIONING TOOL IN ASSEMBLY DESIGN

APAR status

• Closed as Permanent restriction.

Error description

• ABSTRACT:
  DMUSPA: Secondary Window closes after clicking OK in
  Sectioning tool in Assembly Design
  SCENARIO:
  1. Launch CATIA with MD2 license.
  2. Open any CATProduct.
  3. Go to Assembly Design workbench.
  4. Click on 'sectioning' command.
  5. In 'sectioning definition' window go to Result tab.
  6. Click on volume cut option.
  7. Check that Secondary window is active.
  8. Click OK in 'sectioning definition' window
  RESULT:
  The Secondary window (Section cut window) closes immediately.
  EXPECTED RESULT:
  The Secondary window (Section cut window) should be active
  after step8.
  

Local fix

• empty
  

Problem summary

• ABSTRACT:
  DMUSPA: Secondary Window closes after clicking OK in
  Sectioning tool in Assembly Design
  SCENARIO:
  1. Launch CATIA with MD2 license.
  2. Open any CATProduct.
  3. Go to Assembly Design workbench.
  4. Click on 'sectioning' command.
  5. In 'sectioning definition' window go to Result tab.
  6. Click on volume cut option.
  7. Check that Secondary window is active.
  8. Click OK in 'sectioning definition' window
  RESULT:
  The Secondary window (Section cut window) closes immediately.
  EXPECTED RESULT:
  The Secondary window (Section cut window) should be active
  after step8.
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN CATIA
  Additional Closure Information:
  Incident Diagnosis:
  Secondary Window closes after clicking OK in Sectioning tool
  in Assembly Design
  Restriction Explanation:
  In case of section feature persistency (meaning whether
  section will be presistent/retained in visualization,
  specification tree & also section result window is kept) on
  clicking OK in section dialog is dependent on specific
  licences only.
  This section feature persistency behavior will be available
  only with products (.prd) like DU1, DN1 (for P1 licences) and
  DMN, DMU (for P2 licences). Since MD2 does not authorize any
  of the above, behavior will be seen as currently.
  Please use the mentioned licenses to get this feature
  available.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels