HD91767: 3DVIA IMPORTED RESULT DOES NOT LOOK LIKE CATIA V5 CREATED DATASE T

APAR status

• Closed as program error.

Error description

• Scenario :
  Environment:
  Composer R2009x
  Composer R2010
  Sample data
  Product1.smg --> This is created on Composer R2010.
  Product1.CATProduct --> This is created on CATIA R18
  Click File/Open ?Product1.CATProduct?.
  Cannot import the run which the diameter is below 10.00mm.
  *The part exists in Assembly tree but we cannot see the
  object.
  

Local fix

• empty
  

Problem summary

• Scenario :
  Environment:
  Composer R2009x
  Composer R2010
  Sample data
  Product1.smg --> This is created on Composer R2010.
  Product1.CATProduct --> This is created on CATIA R18
  Click File/Open ???Product1.CATProduct???.
  Cannot import the run which the diameter is below 10.00mm.
  *The part exists in Assembly tree but we cannot see the
  object.
  

Problem conclusion

• THIS PROBLEM WILL BE FIXED ON 3DVIA COMPOSER VERSION V6R2011x
  level.
  THIS PROBLEM WILL BE FIXED ON IS FIXED IN CATIA VERSION V5R21
  GA level.
  NOTE THAT THIS PROBLEM WILL ALSO BE FIXED ON CATIA V5R20 SP2.
  Additional Closure Information:
  The tolerance used for building polyline circular profile is
  corrected so that the program works
  fine with the conversion of Runs having <= 10mm dia.
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 NT>XP

• Fixed component ID

  569151000

Applicable component levels

• R520 PSN

     UP