HD90972: ELECTRICAL SOFTWARE ERROR INSIDE THE EXTRACT COMMAND

APAR status

• Closed as unreproducible in next release.

Error description

• ABSTRACT:
  Electrical software error inside the extract command
  .
  SCENARIO:
  1) Launch 3DCOM and CATIA and connect to VPM.
  2) Open the electrical harness assembly to CV5.
  3) Save the assembly to vpm as black box.
  4) Close the session in CATIA.
  5) In portal search for the saved assembly.
  6) Open the PSN and expand the PSN.
  7) Right click on the document and select > CATIA_V5 > Load >
  Open as reference
  8) Create a new product session in CATIA and select Harness
  Flattening Parameters.
  9) Switch the Loaded Assembly to Design Mode.
  10) Activate the second Product window
  11) Select the Extract command and select Root assembly part.
  .
  RESULT:
  Error Displayed in the window "Electrical software error
  inside the extract command" and no data is extracted
  .
  

Local fix

Problem summary

• ABSTRACT:
  Electrical software error inside the extract command
  .
  SCENARIO:
  1) Launch 3DCOM and CATIA and connect to VPM.
  2) Open the electrical harness assembly to CV5.
  3) Save the assembly to vpm as black box.
  4) Close the session in CATIA.
  5) In portal search for the saved assembly.
  6) Open the PSN and expand the PSN.
  7) Right click on the document and select > CATIA_V5 > Load >
  Open as reference
  8) Create a new product session in CATIA and select Harness
  Flattening Parameters.
  9) Switch the Loaded Assembly to Design Mode.
  10) Activate the second Product window
  11) Select the Extract command and select Root assembly part.
  .
  RESULT:
  Error Displayed in the window "Electrical software error
  inside the extract command" and no data is extracted
  .
  

Problem conclusion

• THE PROBLEM WAS SUBMITTED ON :
      CATIA VERSION V5R19.
  THIS PROBLEM IS NOT REPRODUCIBLE ON :
  CATIA VERSION V5R21 GA level
  CATIA V5R19 SP7.
  CATIA VERSION V5R20 SP1.
  Additional Closure Information:
  PROBLEM DESCRIPTION:
  Electrical software error inside the extract command
  CLOSURE DESCRIPTION:
  Problem is corrected with change in code in CATIA on above
  mentioned levels
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

• Fixed component name

  CATIA V5 WIN 64

• Fixed component ID

  569165000

Applicable component levels

• R519 PSN

     UP